CVE Database

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not handle uploaded files correctly. An unauthenticated attacker could take advantage of this situation to store an XSS attack, which could - when a legitimate user accesses the error logs - perform arbitrary actions in the name of the user.

A vulnerability has been identified in SICAM T (All versions < V3.0). The web based management interface of affected devices does not employ special access protection for certain internal developer views. This could allow unauthenticated users to extract internal configuration details.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not properly validate input in the configuration interface. This could allow an authenticated attacker to place persistent XSS attacks to perform arbitrary actions in the name of a logged user which accesses the affected views.

A vulnerability has been identified in SICAM T (All versions < V3.0). The web based management interface of affected devices does not employ special access protection for certain internal developer views. This could allow authenticated users to access critical device information.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices use a limited range for challenges that are sent during the unencrypted challenge-response communication. An unauthenticated attacker could capture a valid challenge-response pair generated by a legitimate user, and request the webpage repeatedly to wait for the same challenge to reappear for which the correct response is known. This could allow the attacker to access the management interface of the device.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not properly handle the input of a GET request parameter. The provided argument is directly reflected in the web server response. This could allow an unauthenticated attacker to perform reflected XSS attacks.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not encrypt web traffic with clients but communicate in cleartext via HTTP. This could allow an unauthenticated attacker to capture the traffic and interfere with the functionality of the device.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not properly validate parameters of certain GET and POST requests. This could allow an unauthenticated attacker to set the device to a denial of service state or to control the program counter and, thus, execute arbitrary code on the device.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not properly validate parameters of POST requests. This could allow an authenticated attacker to set the device to a denial of service state or to control the program counter and, thus, execute arbitrary code on the device.

A buffer overflow vulnerability exists in the razermouse driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

A buffer overflow vulnerability exists in the razeraccessory driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

A buffer overflow vulnerability exists in the razerkbd driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

Out-of-bounds Write in GitHub repository vim/vim prior to 8.2.4977.

needrestart 0.8 through 3.5 before 3.6 is prone to local privilege escalation. Regexes to detect the Perl, Python, and Ruby interpreters are not anchored, allowing a local user to escalate privileges when needrestart tries to detect if interpreters are using old source files.

nfs_lookup_reply in net/nfs.c in Das U-Boot through 2022.04 (and through 2022.07-rc2) has an unbounded memcpy with a failed length check, leading to a buffer overflow. NOTE: this issue exists because of an incorrect fix for CVE-2019-14196.

Improper resource shutdown or release in firmware for some Intel(R) SSD, Intel(R) SSD DC, Intel(R) Optane(TM) SSD and Intel(R) Optane(TM) SSD DC may allow a privileged user to potentially enable denial of service via local access.

SolarView Compact ver.6.00 was discovered to contain a command injection vulnerability via conf_mail.php.

A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device.

Improper Removal of Sensitive Information Before Storage or Transfer in GitHub repository eventsource/eventsource prior to v2.0.2.

Windows LSA Spoofing Vulnerability

Active Directory Domain Services Elevation of Privilege Vulnerability

This is a concurrency issue that can result in the wrong caller principal being returned from the session context of an EJB that is configured with a RunAs principal. In particular, the org.jboss.as.ejb3.component.EJBComponent class has an incomingRunAsIdentity field. This field is used by the org.jboss.as.ejb3.security.RunAsPrincipalInterceptor to keep track of the current identity prior to switching to a new identity created using the RunAs principal. The exploit consist that the EJBComponent#incomingRunAsIdentity field is currently just a SecurityIdentity. This means in a concurrent environment, where multiple users are repeatedly invoking an EJB that is configured with a RunAs principal, it's possible for the wrong the caller principal to be returned from EJBComponent#getCallerPrincipal. Similarly, it's also possible for EJBComponent#isCallerInRole to return the wrong value. Both of these methods rely on incomingRunAsIdentity. Affects all versions of JBoss EAP from 7.1.0 and all versions of WildFly 11+ when Elytron is enabled.

Failure to validate inputs in SMM may allow an attacker to create a mishandled error leaving the DRTM UApp in a partially initialized state potentially resulting in loss of memory integrity.

There is a buffer over-read in Ruby before 2.6.10, 2.7.x before 2.7.6, 3.x before 3.0.4, and 3.1.x before 3.1.2. It occurs in String-to-Float conversion, including Kernel#Float and String#to_f.

RARLAB UnRAR before 6.12 on Linux and UNIX allows directory traversal to write to files during an extract (aka unpack) operation, as demonstrated by creating a ~/.ssh/authorized_keys file. NOTE: WinRAR and Android RAR are unaffected.

Use after free in append_command in GitHub repository vim/vim prior to 8.2.4895. This vulnerability is capable of crashing software, Bypass Protection Mechanism, Modify Memory, and possible remote execution

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. In affected versions an attacker can create a workflow which produces a HTML artifact containing an HTML file that contains a script which uses XHR calls to interact with the Argo Server API. The attacker emails the deep-link to the artifact to their victim. The victim opens the link, the script starts running. As the script has access to the Argo Server API (as the victim), so may read information about the victim’s workflows, or create and delete workflows. Note the attacker must be an insider: they must have access to the same cluster as the victim and must already be able to run their own workflows. The attacker must have an understanding of the victim’s system. We have seen no evidence of this in the wild. We urge all users to upgrade to the fixed versions.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all 12.1.x and 11.6.x versions, undisclosed requests may bypass iControl REST authentication. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.

An issue was discovered on certain Fujitsu LIEFBOOK devices (A3510, U9310, U7511/U7411/U7311, U9311, E5510/E5410, U7510/U7410/U7310, E459/E449) with BIOS versions before v1.09 (A3510), v2.17 (U9310), v2.30 (U7511/U7411/U7311), v2.33 (U9311), v2.23 (E5510), v2.19 (U7510/U7410), v2.13 (U7310), and v1.09 (E459/E449). The FjGabiFlashCoreAbstractionSmm driver registers a Software System Management Interrupt (SWSMI) handler that is not sufficiently validated to ensure that the CommBuffer (or any other communication buffer's nested contents) are not pointing to SMRAM contents. A potential attacker can therefore write fixed data to SMRAM, which could lead to data corruption inside this memory (e.g., change the SMI handler's code or modify SMRAM map structures to break input pointer validation for other SMI handlers). Thus, the attacker could elevate privileges from ring 0 to ring -2 and execute arbitrary code in SMM.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

XMP Toolkit SDK version 2021.07 (and earlier) is affected by a stack-based buffer overflow vulnerability potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted file.

XMP Toolkit 2021.07 (and earlier) is affected by a Null pointer dereference vulnerability when parsing a specially crafted file. An unauthenticated attacker could leverage this vulnerability to achieve an application denial-of-service in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Script injection in M-Files Admin versions before 22.2.11051.0, allows executing stored script in admin tool. M-Files Admin tool allows storing configuration data with script which may then get run by another vault administrator. Requires vault admin level authentication and is not remotely exploitable

Sinatra before 2.2.0 does not validate that the expanded path matches public_dir when serving static files.

The package angular after 1.7.0 are vulnerable to Regular Expression Denial of Service (ReDoS) by providing a custom locale rule that makes it possible to assign the parameter in posPre: ' '.repeat() of NUMBER_FORMATS.PATTERNS[1].posPre with a very high value. **Note:** 1) This package has been deprecated and is no longer maintained. 2) The vulnerable versions are 1.7.0 and higher.

Zoho ManageEngine Access Manager Plus before 4302, Password Manager Pro before 12007, and PAM360 before 5401 are vulnerable to access-control bypass on a few Rest API URLs (for SSOutAction. SSLAction. LicenseMgr. GetProductDetails. GetDashboard. FetchEvents. and Synchronize) via the ../RestAPI substring.

ESAPI (The OWASP Enterprise Security API) is a free, open source, web application security control library. Prior to version 2.3.0.0, there is a potential for a cross-site scripting vulnerability in ESAPI caused by a incorrect regular expression for "onsiteURL" in the **antisamy-esapi.xml** configuration file that can cause "javascript:" URLs to fail to be correctly sanitized. This issue is patched in ESAPI 2.3.0.0. As a workaround, manually edit the **antisamy-esapi.xml** configuration files to change the "onsiteURL" regular expression. More information about remediation of the vulnerability, including the workaround, is available in the maintainers' release notes and security bulletin.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). Prior to version 2.7.0, server side authentication against a `SAM` file might be successful for invalid credentials if the server has configured an invalid `SAM` file path. FreeRDP based clients are not affected. RDP server implementations using FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0 contains a fix for this issue. As a workaround, use custom authentication via `HashCallback` and/or ensure the `SAM` database path configured is valid and the application has file handles left.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager (NTLM) authentication does not properly abort when someone provides and empty password value. This issue affects FreeRDP based RDP Server implementations. RDP clients are not affected. The vulnerability is patched in FreeRDP 2.7.0. There are currently no known workarounds.

In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations.

The Service Appliance component in Mitel MiVoice Connect through 19.2 SP3 allows remote code execution because of incorrect data validation. The Service Appliances are SA 100, SA 400, and Virtual SA.

ESAPI (The OWASP Enterprise Security API) is a free, open source, web application security control library. Prior to version 2.3.0.0, the default implementation of `Validator.getValidDirectoryPath(String, String, File, boolean)` may incorrectly treat the tested input string as a child of the specified parent directory. This potentially could allow control-flow bypass checks to be defeated if an attack can specify the entire string representing the 'input' path. This vulnerability is patched in release 2.3.0.0 of ESAPI. As a workaround, it is possible to write one's own implementation of the Validator interface. However, maintainers do not recommend this.

The myCred WordPress plugin before 2.4.3.1 does not have authorisation and CSRF checks in its mycred-tools-import-export AJAX action, allowing any authenticated user to call and and retrieve the list of email address present in the blog

The myCred WordPress plugin before 2.4.3.1 does not have any authorisation and CSRF checks in the mycred-tools-import-export AJAX action, allowing any authenticated users, such as subscribers, to call it and import mycred setup, thus creating badges, managing points or creating arbitrary posts.

The myCred WordPress plugin before 2.4.4.1 does not have any authorisation in place in its mycred-tools-select-user AJAX action, allowing any authenticated user, such as subscriber to call and retrieve all email addresses from the blog

Baby Care System v1.0 was discovered to contain a SQL injection vulnerability via /admin/uesrs.php&&action=delete&userid=4.

Baby Care System v1.0 was discovered to contain a SQL injection vulnerability via /admin/uesrs.php&action=type&userrole=User&userid=.