Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF. String fields from eBPF events in columns output mode are rendered to the terminal without any sanitization of control characters or ANSI escape sequences. Therefore, a maliciously forged – partially or completely – event payload, coming from an observed container, might inject the escape sequences into the terminal of ig operators, with various effects. The columns output mode is the default when running ig run interactively.
A reachable infinite loop via an integer wraparound is present in Silicon Labs' Matter SDK which allows an attacker to trigger a denial of service. A hard reset is required to recover the device.
Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.8, there is a potential vulnerability in Traefik managing STARTTLS requests. An unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely, leading to a denial of service. This vulnerability is fixed in 3.6.8.
Arduino App Lab is a cross-platform IDE for developing Arduino Apps. Prior to 0.4.0, a vulnerability was identified in the Terminal component of the arduino-app-lab application. The issue stems from insufficient sanitization and validation of input data received from connected hardware devices, specifically in the _info.Serial and _info.Address metadata fields. The problem occurs during device information handling. When a board is connected, the application collects identifying attributes to establish a terminal session. Because strict validation is not enforced for the Serial and Address parameters, an attacker with control over the connected hardware can supply specially crafted strings containing shell metacharacters. The exploitation requires direct physical access to a previously tampered board. When the host system processes these fields, any injected payload is executed with the privileges of the user running arduino-app-lab. This vulnerability is fixed in 0.4.0.
authentik is an open-source identity provider. Prior to 2025.8.6, 2025.10.4, and 2025.12.4, when using a SAML Source that has the option Verify Assertion Signature under Verification Certificate enabled and not Verify Response Signature, or does not have the Encryption Certificate setting under Advanced Protocol settings configured, it was possible for an attacker to inject a malicious assertion before the signed assertion that authentik would use instead. authentik 2025.8.6, 2025.10.4, and 2025.12.4 fix this issue.
LavinMQ is a high-performance message queue & streaming server. Before 2.6.6, an authenticated user could access metadata in the broker they should not have access to. This vulnerability is fixed in 2.6.6.
LavinMQ is a high-performance message queue & streaming server. Before 2.6.8, an authenticated user, with the “Policymaker” tag, could create shovels bypassing access controls. an authenticated user with the "Policymaker" management tag could exploit it to read messages from vhosts they are not authorized to access or publish messages to vhosts they are not authorized to access. This vulnerability is fixed in 2.6.8.
authentik is an open-source identity provider. Prior to 2025.10.4 and 2025.12.4, with a malformed cookie it was possible to bypass authentication when using forward authentication in the authentik Proxy Provider when used in conjunction with Traefik or Caddy as reverse proxy. When a malicious cookie was used, none of the authentik-specific X-Authentik-* headers were set which depending on application can grant access to an attacker. authentik 2025.10.4 and 2025.12.4 fix this issue.
authentik is an open-source identity provider. From 2021.3.1 to before 2025.8.6, 2025.10.4, and 2025.12.4, when using delegated permissions, a User that has the permission Can view * Property Mapping or Can view Expression Policy is able to execute arbitrary code within the authentik server container through the test endpoint, which is intended to preview how a property mapping/policy works. authentik 2025.8.6, 2025.10.4, and 2025.12.4 fix this issue.
FrankenPHP is a modern application server for PHP. Prior to 1.11.2, FrankenPHP’s CGI path splitting logic improperly handles Unicode characters during case conversion. The logic computes the split index (for finding .php) on a lowercased copy of the request path but applies that byte index to the original path. Because strings.ToLower() in Go can increase the byte length of certain UTF-8 characters (e.g., Ⱥ expands when lowercased), the computed index may not align with the correct position in the original string. This results in an incorrect SCRIPT_NAME and SCRIPT_FILENAME, potentially causing FrankenPHP to execute a file other than the one intended by the URI. This vulnerability is fixed in 1.11.2.
FrankenPHP is a modern application server for PHP. Prior to 1.11.2, when running FrankenPHP in worker mode, the $_SESSION superglobal is not correctly reset between requests. This allows a subsequent request processed by the same worker to access the $_SESSION data of the previous request (potentially belonging to a different user) before session_start() is called. This vulnerability is fixed in 1.11.2.
Element Server Suite Community Edition (ESS Community) deploys a Matrix stack using the provided Helm charts and Kubernetes distribution. The ESS Community Helm Chart secrets initialization hook (using matrix-tools container before 0.5.7) is using an insecure Matrix server key generation method, allowing network attackers to potentially recreate the same key pair, allowing them to impersonate the victim server. The secret is generated by the secrets initialization hook, in the ESS Community Helm Chart values, if both initSecrets.enabled is not set to false and synapse.signingKey is not defined. Given a server key in Matrix authenticates both requests originating from and events constructed on a given server, this potentially impacts confidentiality, integrity and availability of rooms which have a vulnerable server present as a member. The confidentiality of past conversations in end-to-end encrypted rooms is not impacted. The key generation issue was fixed in matrix-tools 0.5.7, released as part of ESS Community Helm Chart 25.12.1.
A heap buffer overflow in the processRequest function of Open TFTP Server MultiThreaded v1.7 allows attackers to cause a Denial of Service (DoS) via a crafted DATA packet.
A stack overflow in the ZBarcode_Encode function of Monkeybread Software MBS DynaPDF Plugin v21.3.1.1 allows attackers to cause a Denial of Service (DoS) via a crafted input.
thesystem App 1.0 contains a SQL injection vulnerability that allows attackers to bypass authentication by manipulating the username parameter. Attackers can inject malicious SQL code like ' or '1=1 to the username field to gain unauthorized access to user accounts.
TheSystem 1.0 contains a SQL injection vulnerability that allows attackers to bypass authentication by manipulating the 'server_name' parameter. Attackers can inject malicious SQL code like ' or '1=1 to retrieve unauthorized database records and potentially access sensitive system information.
Realtek IIS Codec Service 6.4.10041.133 contains an unquoted service path vulnerability that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in the service configuration to inject malicious executables and escalate privileges on the system.
Wondershare MobileGo 8.5.0 contains an insecure file permissions vulnerability that allows local users to modify executable files in the application directory. Attackers can replace the original MobileGo.exe with a malicious executable to create a new user account and add it to the Administrators group with full system access.
NextVPN 4.10 contains an insecure file permissions vulnerability that allows local users to modify executable files with full access rights. Attackers can replace system executables with malicious files to gain SYSTEM or Administrator privileges through unauthorized file modification.
newbee-mall stores and verifies user passwords using an unsalted MD5 hashing algorithm. The implementation does not incorporate per-user salts or computational cost controls, enabling attackers who obtain password hashes through database exposure, backup leakage, or other compromise vectors to rapidly recover plaintext credentials via offline attacks.
newbee-mall includes pre-seeded administrator accounts in its database initialization script. These accounts are provisioned with a predictable default password. Deployments that initialize or reset the database using the provided schema and fail to change the default administrative credentials may allow unauthenticated attackers to log in as an administrator and gain full administrative control of the application.
webtransport-go is an implementation of the WebTransport protocol. Prior to 0.10.0, an attacker can cause unbounded memory consumption repeatedly creating and closing many WebTransport streams. Closed streams were not removed from an internal session map, preventing garbage collection of their resources. This vulnerability is fixed in v0.10.0.
webtransport-go is an implementation of the WebTransport protocol. Prior to v0.10.0, an attacker can cause a denial of service in webtransport-go by preventing or indefinitely delaying WebTransport session closure. A malicious peer can withhold QUIC flow control credit on the CONNECT stream, blocking transmission of the WT_CLOSE_SESSION capsule and causing the close operation to hang. This vulnerability is fixed in v0.10.0.
webtransport-go is an implementation of the WebTransport protocol. From 0.3.0 to 0.9.0, an attacker can cause excessive memory consumption in webtransport-go's session implementation by sending a WT_CLOSE_SESSION capsule containing an excessively large Application Error Message. The implementation does not enforce the draft-mandated limit of 1024 bytes on this field, allowing a peer to send an arbitrarily large message payload that is fully read and stored in memory. This allows an attacker to consume an arbitrary amount of memory. The attacker must transmit the full payload to achieve the memory consumption, but the lack of any upper bound makes large-scale attacks feasible given sufficient bandwidth. This vulnerability is fixed in 0.10.0.
p2r3 Bareiron commit: 8e4d4020d is vulnerable to Buffer Overflow, which allows unauthenticated remote attackers to cause a denial of service via a packet sent to the server.
p2r3 bareiron commit: 8e4d4020d contains an Out-of-bounds Read, which allows unauthenticated remote attackers to get relative information leakage via a packet sent to the server
A DLL hijacking vulnerability in Doc Nav could allow a local attacker to achieve privilege escalation, potentially resulting in arbitrary code execution.
Improper Access Control in an on-chip debug interface could allow a privileged attacker to enable a debug interface and potentially compromise data confidentiality or integrity.
Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system.
Type confusion in the AMD Secure Processor (ASP) could allow an attacker to pass a malformed argument to the External Global Memory Interconnect Trusted Agent (XGMI TA) leading to a memory safety violation potentially resulting in loss of confidentiality, integrity, or availability.
Improper input validation within RAS TA Driver can allow a local attacker to access out-of-bounds memory, potentially resulting in a denial-of-service condition.
FreePBX is an open-source web-based graphical user interface (GUI) that manages Asterisk. Prior to 17.0.5 and 16.0.17, FreePBX module api (PBX API) is vulnerable to privilege escalation by authenticated users with REST/GraphQL API access. This vulnerability allows an attacker to forge a valid JWT with full access to the REST and GraphQL APIs on a FreePBX that they've already connected to, possibly as a lower privileged user. The JWT is signed using the api-oauth.key private key. An attacker can generate their own token if they possess this key (e.g., by accessing an affected instance), and specify any scopes they wish (e.g., rest, gql), bypassing traditional authorization checks. However, FreePBX enforces that the jti (JWT ID) claim must exist in the database (api_access_tokens table in the asterisk MySQL database) in order for the token to be accepted. Therefore, the attacker must know a jti value that already exists on the target instance. This vulnerability is fixed in 17.0.5 and 16.0.17.
BrightSign players running BrightSign OS series 4 prior to v8.5.53.1 or
series 5 prior to v9.0.166 use a default password that is guessable with
knowledge of the device information. The latest release fixes this
issue for new installations; users of old installations are encouraged
to change all default passwords.
Crawl4AI versions prior to 0.8.0 contain a local file inclusion vulnerability in the Docker API deployment. The /execute_js, /screenshot, /pdf, and /html endpoints accept file:// URLs, allowing unauthenticated remote attackers to read arbitrary files from the server filesystem. An attacker can access sensitive files such as /etc/passwd, /etc/shadow, application configuration files, and environment variables via /proc/self/environ, potentially exposing credentials, API keys, and internal application structure.
Crawl4AI versions prior to 0.8.0 contain a remote code execution vulnerability in the Docker API deployment. The /crawl endpoint accepts a hooks parameter containing Python code that is executed using exec(). The __import__ builtin was included in the allowed builtins, allowing unauthenticated remote attackers to import arbitrary modules and execute system commands. Successful exploitation allows full server compromise, including arbitrary command execution, file read and write access, sensitive data exfiltration, and lateral movement within internal networks.
Galaxy FDS Android SDK (XiaoMi/galaxy-fds-sdk-android) version 3.0.8 and prior disable TLS hostname verification when HTTPS is enabled (the default configuration). In GalaxyFDSClientImpl.createHttpClient(), the SDK configures Apache HttpClient with SSLSocketFactory.ALLOW_ALL_HOSTNAME_VERIFIER, which accepts any valid TLS certificate regardless of hostname mismatch. Because HTTPS is enabled by default in FDSClientConfiguration, all applications using the SDK with default settings are affected. This vulnerability allows a man-in-the-middle attacker to intercept and modify SDK communications to Xiaomi FDS cloud storage endpoints, potentially exposing authentication credentials, file contents, and API responses. The XiaoMi/galaxy-fds-sdk-android open source project has reached end-of-life status.
An issue in halo v.2.22.4 and before allows a remote attacker to cause a denial of service via a crafted payload to the public comment submission endpoint
An issue in the "My Details" user profile functionality of Ideagen Q-Pulse 7.1.0.32 allows an authenticated user to view other users' profile information by modifying the objectKey HTTP parameter in the My Details page URL.
Cross Site Request Forgery vulnerability in Dolibarr ERP & CRM v.22.0.9 allows a remote attacker to escalate privileges via the notes field in perms.php NOTE: this is disputed by a third party who indicates that exploitation can only occur if an unprivileged user knows the token of an admin user.
npm @farmfe/core before 1.7.6 is Missing Origin Validation in WebSocket. The development (hot module reloading) server does not validate origin when connecting to a WebSocket client. This allows attackers to surveil developers running Farm who visit their webpage and steal source code that is leaked by the WebSocket server.
The FastDup – Fastest WordPress Migration & Duplicator plugin for WordPress is vulnerable to unauthorized backup creation and download due to a missing capability check on REST API endpoints in all versions up to, and including, 2.7.1. This makes it possible for authenticated attackers, with Contributor-level access and above, to create and download full-site backup archives containing the entire WordPress installation, including database exports and configuration files.
Unrestricted Upload of File with Dangerous Type vulnerability in NTN Information Processing Services Computer Software Hardware Industry and Trade Ltd. Co. Smart Panel allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Smart Panel: before 20251215.
An unintended proxy or intermediary in the AMD power management firmware (PMFW) could allow a privileged attacker to send malformed messages to the system management unit (SMU) potentially resulting in arbitrary code execution.