In the Linux kernel, the following vulnerability has been resolved:
memory: of: Fix refcount leak bug in of_get_ddr_timings()
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
In the Linux kernel, the following vulnerability has been resolved:
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
Can not set the @shared_hcd to NULL before decrease the usage count
by usb_put_hcd(), this will cause the shared hcd not released.
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@34/tcpc/connector
The 'fwnode' set in tcpci_parse_config() which is called
in tcpci_register_port(), its node refcount is increased
in device_get_named_child_node(). It needs be put while
exiting, so call fwnode_handle_put() in the error path of
tcpci_register_port() and in tcpci_unregister_port() to
avoid leak.
In the Linux kernel, the following vulnerability has been resolved:
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
In the Linux kernel, the following vulnerability has been resolved:
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp
needs to be freed.
In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Fix crash on isr after kexec()
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
[ joro: Fixed spelling in commit message ]
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
In the Linux kernel, the following vulnerability has been resolved:
btrfs: abort transaction on unexpected eb generation at btrfs_copy_root()
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
Stored cross-site scripting (XSS) vulnerability in Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote authenticated attackers with the instance administrator role to inject arbitrary web script or HTML into all pages via a crafted payload injected into the Instance Configuration's (1) CDN Host HTTP text field or (2) CDN Host HTTPS text field.
Stored cross-site scripting vulnerability in M-Files Hubshare before version 25.8 allows authenticated attackers to cause script execution for other users.
A vulnerability has been found in newbee-mall up to 613a662adf1da7623ec34459bc83e3c1b12d8ce7. This issue affects the function paySuccess of the file /paySuccess of the component Order Status Handler. The manipulation of the argument orderNo leads to improper authorization. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided.
A Regular Expression Denial of Service (ReDoS) vulnerability was discovered in the Hugging Face Transformers library, specifically within the `normalize_numbers()` method of the `EnglishNormalizer` class. This vulnerability affects versions up to 4.52.4 and is fixed in version 4.53.0. The issue arises from the method's handling of numeric strings, which can be exploited using crafted input strings containing long sequences of digits, leading to excessive CPU consumption. This vulnerability impacts text-to-speech and number normalization tasks, potentially causing service disruption, resource exhaustion, and API vulnerabilities.
IBM PowerVM Hypervisor FW950.00 through FW950.E0, FW1050.00 through FW1050.50, and FW1060.00 through FW1060.40 could allow a local privileged user to cause a denial of service by issuing a specially crafted IBM i hypervisor call that would disclose memory contents or consume excessive memory resources.
A security flaw has been discovered in fcba_zzm ics-park Smart Park Management System 2.0. This vulnerability affects unknown code of the file FileUploadUtils.java. The manipulation of the argument File results in unrestricted upload. The attack can be launched remotely. The exploit has been released to the public and may be exploited.
A vulnerability was identified in Magicblack MacCMS 2025.1000.4050. This affects an unknown part of the component API Handler. The manipulation of the argument cjurl leads to server-side request forgery. The attack can be initiated remotely. The exploit is publicly available and might be used.
A vulnerability was found in Magicblack MacCMS 2025.1000.4050. Affected by this vulnerability is the function col_url of the component Scheduled Task Handler. Performing manipulation of the argument cjurl results in server-side request forgery. It is possible to initiate the attack remotely.
A vulnerability has been found in fcba_zzm ics-park Smart Park Management System 2.0. Affected is an unknown function of the file ruoyi-quartz/src/main/java/com/ruoyi/quartz/controller/JobController.java of the component Scheduled Task Module. Such manipulation leads to code injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.
A security vulnerability has been detected in CRMEB up to 5.6.1. The impacted element is the function testOutUrl of the file app/services/out/OutAccountServices.php. The manipulation of the argument push_token_url leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in CRMEB up to 5.6.1. The affected element is the function editAddress of the file app/services/user/UserAddressServices.php. Executing manipulation of the argument ID can lead to improper authorization. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in CRMEB up to 5.6.1. Impacted is the function Save of the file app/services/system/admin/SystemAdminServices.php of the component Administrator Password Handler. Performing manipulation of the argument ID results in improper authorization. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in codesiddhant Jasmin Ransomware up to 1.0.1. This vulnerability affects unknown code of the file /handshake.php. This manipulation of the argument machine_name/computer_user/os/date/time/ip/location/systemid/password causes sql injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in yangzongzhuan RuoYi up to 4.8.1. Affected by this vulnerability is an unknown functionality of the file /system/role/authUser/cancelAll of the component Role Handler. Executing manipulation of the argument roleId/userIds can lead to improper authorization. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/api/playlist/playsinglefile.php. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Multiple stored cross-site scripting (XSS) vulnerabilities in Audi UTR 2.0 Universal Traffic Recorder 2.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the wifi_sta_ssid or wifi_ap_ssid parameters.
A weakness has been identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/api/playlist/shuffle.php. Executing manipulation of the argument playlist can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected is an unknown function of the file /htdocs/api/playlist/single.php. Performing manipulation of the argument playlist results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
Open redirect vulnerability in the System Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_configuration_admin_web_portlet_SystemSettingsPortlet_redirect parameter.
Open redirect vulnerability in the Instance Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_configuration_admin_web_portlet_InstanceSettingsPortlet_redirect parameter.
Open redirect vulnerability in the Site Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_site_admin_web_portlet_SiteSettingsPortlet_redirect parameter.
A vulnerability was identified in Wavlink WL-WN578W2 221110. This impacts the function sub_401340/sub_401BA4 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in Wavlink WL-WN578W2 221110. The affected element is an unknown function of the file /sysinit.html. The manipulation of the argument newpass/confpass leads to weak password recovery. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in Wavlink WL-WN578W2 221110. Impacted is an unknown function of the file /live_online.shtml. Executing manipulation can lead to information disclosure. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A Stored cross-site scripting vulnerability in the Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q3.0, 2025.Q2.0 through 2025.Q2.12, 2025.Q1.0 through 2025.Q1.17, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13 and 2024.Q1.1 through 2024.Q1.20 allows an remote authenticated attacker to inject JavaScript through the organization site names. The malicious payload is stored and executed without proper sanitization or escaping.
OpenSynergy BlueSDK (aka Blue SDK) through 6.x has Incorrect Control Flow Scoping. The specific flaw exists within the BlueSDK Bluetooth stack. The issue results from the lack of proper return control flow after detecting an unusual condition. An attacker can leverage this to bypass a security validation and make the incoming data be processed.
OpenSynergy BlueSDK (aka Blue SDK) through 6.x has Improper Input Validation. The specific flaw exists within the BlueSDK Bluetooth stack. The issue results from the lack of proper validation of remote L2CAP channel ID (CID). An attacker can leverage this to create an L2CAP channel with the null identifier assigned as a remote CID.
In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix the setting of capabilities when automounting a new filesystem
Capabilities cannot be inherited when we cross into a new filesystem.
They need to be reset to the minimal defaults, and then probed for
again.
In the Linux kernel, the following vulnerability has been resolved:
block: avoid possible overflow for chunk_sectors check in blk_stack_limits()
In blk_stack_limits(), we check that the t->chunk_sectors value is a
multiple of the t->physical_block_size value.
However, by finding the chunk_sectors value in bytes, we may overflow
the unsigned int which holds chunk_sectors, so change the check to be
based on sectors.
In the Linux kernel, the following vulnerability has been resolved:
ARM: tegra: Use I/O memcpy to write to IRAM
Kasan crashes the kernel trying to check boundaries when using the
normal memcpy.
In the Linux kernel, the following vulnerability has been resolved:
dm: Always split write BIOs to zoned device limits
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
A security flaw has been discovered in JeecgBoot up to 3.8.2. Affected by this issue is some unknown functionality of the file /sys/tenant/exportLog of the component Tenant Log Export. The manipulation results in improper authorization. The attack can be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in JeecgBoot up to 3.8.2. Affected by this vulnerability is an unknown functionality of the file /api/system/sendWebSocketMsg of the component WebSocket Message Handler. The manipulation of the argument userIds leads to improper authorization. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
The Contact Form 7 reCAPTCHA WordPress plugin through 1.2.0 does not escape the $_SERVER['REQUEST_URI'] parameter before outputting it back in an attribute, which could lead to Reflected Cross-Site Scripting in old web browsers.
A weakness has been identified in linlinjava litemall up to 1.8.0. This affects the function WxAftersaleController of the file /wx/aftersale/cancel. Executing manipulation of the argument ID can lead to improper authorization. The attack can be executed remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
curl's websocket code did not update the 32 bit mask pattern for each new
outgoing frame as the specification says. Instead it used a fixed mask that
persisted and was used throughout the entire connection.
A predictable mask pattern allows for a malicious server to induce traffic
between the two communicating parties that could be interpreted by an involved
proxy (configured or transparent) as genuine, real, HTTP traffic with content
and thereby poison its cache. That cached poisoned content could then be
served to all users of that proxy.
A flaw has been found in YunaiV ruoyi-vue-pro up to 2025.09. Impacted is an unknown function of the file /crm/contact/transfer. This manipulation of the argument ids/newOwnerUserId causes improper authorization. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
JSON Web Services in Liferay Portal 7.4.0 through 7.4.3.119, and Liferay DXP 2024.Q1.1 through 2024.Q1.9, 7.4 GA through update 92 published to OSGi are registered and invoked directly as classes which allows Service Access Policies get executed.
The organization selector in Liferay Portal 7.4.0 through 7.4.3.124, and Liferay DXP 2024.Q1.1 through 2024.Q1.12 and 7.4 update 81 through update 85 does not check user permission, which allows remote authenticated users to obtain a list of all organizations.
A vulnerability was detected in YunaiV yudao-cloud up to 2025.09. This issue affects some unknown processing of the file /crm/receivable/submit. The manipulation of the argument ID results in improper authorization. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in YunaiV ruoyi-vue-pro up to 2025.09. This vulnerability affects unknown code of the file /crm/contract/transfer. The manipulation of the argument id/newOwnerUserId leads to improper authorization. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in YunaiV yudao-cloud up to 2025.09. This affects an unknown part of the file /crm/business/transfer. Executing manipulation of the argument ids/newOwnerUserId can lead to improper authorization. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in erjinzhi 10OA 1.0. Affected by this issue is some unknown functionality of the file /trial/mvc/item. Performing manipulation of the argument Name results in cross site scripting. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.