CVE Database

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty.

In the Linux kernel, the following vulnerability has been resolved: sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected, cpu_max_bits_warn() generates a runtime warning similar as below when showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]---

Delinea addressed a reported case on Secret Server v11.7.31 (protocol handler version 6.0.3.26) where, within the protocol handler function, URI's were compared before normalization and canonicalization, potentially leading to over matching against the approved list. If this attack were successfully exploited, a remote attacker may be able to convince a user to visit a malicious web-page, or open a malicious document which could trigger the vulnerable handler, allowing them to execute arbitrary code on the user's machine. Delinea added additional validation that the downloaded installer's batch file was in the expected format.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_420xx - fix off by one in uof_get_name() This is called from uof_get_name_420xx() where "num_objs" is the ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: EDAC/bluefield: Fix potential integer overflow The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as 32-bits wide the left-shift operation truncates the upper 16 bits of information during the calculation of the SMC argument. The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any potential integer overflow, i.e. loss of data from upper 16 bits.

In the Linux kernel, the following vulnerability has been resolved: rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu KCSAN reports a data race when access the krcp->monitor_work.timer.expires variable in the schedule_delayed_monitor_work() function: <snip> BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1: schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline] kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839 trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441 bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203 generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849 bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143 __sys_bpf+0x2e5/0x7a0 __do_sys_bpf kernel/bpf/syscall.c:5741 [inline] __se_sys_bpf kernel/bpf/syscall.c:5739 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739 x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0: __mod_timer+0x578/0x7f0 kernel/time/timer.c:1173 add_timer_global+0x51/0x70 kernel/time/timer.c:1330 __queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523 queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552 queue_delayed_work include/linux/workqueue.h:677 [inline] schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline] kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310 worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391 kthread+0x1d1/0x210 kernel/kthread.c:389 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported by Kernel Concurrency Sanitizer on: CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_unbound kfree_rcu_monitor <snip> kfree_rcu_monitor() rearms the work if a "krcp" has to be still offloaded and this is done without holding krcp->lock, whereas the kvfree_call_rcu() holds it. Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so both functions do not race anymore.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get() This loop is supposed to break if the frequency returned from clk_round_rate() is the same as on the previous iteration. However, that check doesn't make sense on the first iteration through the loop. It leads to reading before the start of these->clk_perf_tbl[] array.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: clk: clk-apple-nco: Add NULL check in applnco_probe Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert() Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of qcom_pcie_perst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the Qcom endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup functions are currently causing the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host (as I was told by the Qcom engineers). Thus, fix this crash by moving the controller cleanups to the start of the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources), the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual.

In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the tegra194 endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup functions can cause the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host. Thus, fix this crash by moving the controller cleanups to the start of the pex_ep_event_pex_rst_deassert() function. This function is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources) the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode().

In the Linux kernel, the following vulnerability has been resolved: comedi: Flush partial mappings in error case If some remap_pfn_range() calls succeeded before one failed, we still have buffer pages mapped into the userspace page tables when we drop the buffer reference with comedi_buf_map_put(bm). The userspace mappings are only cleaned up later in the mmap error path. Fix it by explicitly flushing all mappings in our VMA on the error path. See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in error case").

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent a potential integer overflow If the tag length is >= U32_MAX - 3 then the "length + 4" addition can result in an integer overflow. Address this by splitting the decoding into several steps so that decode_cb_compound4res() does not have to perform arithmetic on the unsafe length value.

In the Linux kernel, the following vulnerability has been resolved: um: Fix potential integer overflow during physmem setup This issue happens when the real map size is greater than LONG_MAX, which can be easily triggered on UML/i386.

In the Linux kernel, the following vulnerability has been resolved: x86/xen: don't do PV iret hypercall through hypercall page Instead of jumping to the Xen hypercall page for doing the iret hypercall, directly code the required sequence in xen-asm.S. This is done in preparation of no longer using hypercall page at all, as it has shown to cause problems with speculation mitigations. This is part of XSA-466 / CVE-2024-53241.

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: fix crash when removing device When removing a netfront device directly after a suspend/resume cycle it might happen that the queues have not been setup again, causing a crash during the attempt to stop the queues another time. Fix that by checking the queues are existing before trying to stop them. This is XSA-465 / CVE-2024-53240.

libpoppler.so in Poppler through 24.12.0 has an out-of-bounds read vulnerability within the JBIG2Bitmap::combine function in JBIG2Stream.cc.

IBM i 7.3, 7.4, and 7.5 is vulnerable to bypassing Navigator for i interface restrictions. By sending a specially crafted request, an authenticated attacker could exploit this vulnerability to remotely perform operations that the user is not allowed to perform when using Navigator for i.

IBM i 7.3, 7.4, and 7.5 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks.

A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in macOS Sequoia 15.1. A user may be able to view sensitive user information.

A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in macOS Sequoia 15.1. An app may be able to access sensitive user data.

This issue was addressed through improved state management. This issue is fixed in macOS Sequoia 15.1. A person with physical access to a Mac may be able to bypass Login Window during a software update.

This issue was addressed through improved state management. This issue is fixed in macOS Sequoia 15.1. An attacker with physical access to a Mac may be able to view protected content from the Login Window.

This issue was addressed with improved validation of symlinks. This issue is fixed in macOS Sequoia 15.1. An app may be able to access user-sensitive data.

Nomad Community and Nomad Enterprise ("Nomad") allocations are vulnerable to privilege escalation within a namespace through unredacted workload identity tokens. This vulnerability, identified as CVE-2024-12678, is fixed in Nomad Community Edition 1.9.4 and Nomad Enterprise 1.9.4, 1.8.8, and 1.7.16.

Astro is a web framework for content-driven websites. A bug in the build process allows any unauthenticated user to read parts of the server source code. During build, along with client assets such as css and font files, the sourcemap files **for the server code** are moved to a publicly-accessible folder. Any outside party can read them with an unauthorized HTTP GET request to the same server hosting the rest of the website. While some server files are hashed, making their access obscure, the files corresponding to the file system router (those in `src/pages`) are predictably named. For example. the sourcemap file for `src/pages/index.astro` gets named `dist/client/pages/index.astro.mjs.map`. This vulnerability is the root cause of issue #12703, which links to a simple stackblitz project demonstrating the vulnerability. Upon build, notice the contents of the `dist/client` (referred to as `config.build.client` in astro code) folder. All astro servers make the folder in question accessible to the public internet without any authentication. It contains `.map` files corresponding to the code that runs on the server. All **server-output** projects on Astro 5 versions **v5.0.3** through **v5.0.7**, that have **sourcemaps enabled**, either directly or through an add-on such as `sentry`, are affected. The fix for **server-output** projects was released in **astro@5.0.8**. Additionally, all **static-output** projects built using Astro 4 versions **4.16.17 or older**, or Astro 5 versions **5.0.8 or older**, that have **sourcemaps enabled** are also affected. The fix for **static-output** projects was released in **astro@5.0.9**, and backported to Astro v4 in **astro@4.16.18**. The immediate impact is limited to source code. Any secrets or environment variables are not exposed unless they are present verbatim in the source code. There is no immediate loss of integrity within the the vulnerable server. However, it is possible to subsequently discover another vulnerability via the revealed source code . There is no immediate impact to availability of the vulnerable server. However, the presence of an unsafe regular expression, for example, can quickly be exploited to subsequently compromise the availability. The fix for **server-output** projects was released in **astro@5.0.8**, and the fix for **static-output** projects was released in **astro@5.0.9** and backported to Astro v4 in **astro@4.16.18**. Users are advised to update immediately if they are using sourcemaps or an integration that enables sourcemaps.

IBM Security Guardium 11.5 and 12.0 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks.

A vulnerability was found in itsourcecode Vehicle Management System 1.0. It has been classified as critical. Affected is an unknown function of the file editbill.php. The manipulation of the argument id leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

PVH guests have their ACPI tables constructed by the toolstack. The construction involves building the tables in local memory, which are then copied into guest memory. While actually used parts of the local memory are filled in correctly, excess space that is being allocated is left with its prior contents.

A cross-site scripting (XSS) vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to bypass security mechanisms or read application data. We have already fixed the vulnerability in the following versions: QuLog Center 1.5.0.738 ( 2023/03/06 ) and later QuLog Center 1.4.1.691 ( 2023/03/01 ) and later QuLog Center 1.3.1.645 ( 2023/02/22 ) and later

An uncontrolled resource consumption vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2277 and later QTS 4.5.4.2280 build 20230112 and later QuTS hero h5.0.1.2277 build 20230112 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

Astro is a web framework for content-driven websites. In affected versions a bug in Astro’s CSRF-protection middleware allows requests to bypass CSRF checks. When the `security.checkOrigin` configuration option is set to `true`, Astro middleware will perform a CSRF check. However, a vulnerability exists that can bypass this security. A semicolon-delimited parameter is allowed after the type in `Content-Type`. Web browsers will treat a `Content-Type` such as `application/x-www-form-urlencoded; abc` as a `simple request` and will not perform preflight validation. In this case, CSRF is not blocked as expected. Additionally, the `Content-Type` header is not required for a request. This issue has been addressed in version 4.16.17 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

A vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) which can allow an attacker with existing administrative privileges to inject commands and run as a site user.

Misskey is an open source, federated social media platform.In affected versions missing validation in `NoteCreateService.insertNote`, `ApPersonService.createPerson`, and `ApPersonService.updatePerson` allows an attacker to control the target of any "origin" links (such as the "view on remote instance" banner). Any HTTPS URL can be set, even if it belongs to a different domain than the note / user. Vulnerable Misskey instances will use the unverified URL for several clickable links, allowing an attacker to conduct phishing or other attacks against remote users. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Misskey is an open source, federated social media platform. In affected versions missing validation in `ApInboxService.update` allows an attacker to modify the result of polls belonging to another user. No authentication is required, except for a valid signature from any actor on any remote instance. Vulnerable Misskey instances will accept spoofed updates for remote polls. Local polls are unaffected. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Misskey is an open source, federated social media platform. In affected versions missing validation in `ApRequestService.signedGet` allows an attacker to create fake user profiles that appear to be from a different instance than the one where they actually exist. These profiles can be used to impersonate existing users from the target instance. Vulnerable Misskey instances will accept spoofed users as valid, allowing an attacker to impersonate users on another instance. Attackers have full control of the spoofed user and can post, renote, or otherwise interact like a real account. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Misskey is an open source, federated social media platform. Some APIs using `HttpRequestService` do not properly check the target host. This vulnerability allows an attacker to send POST or GET requests to the internal server, which may result in a SSRF attack.It allows an attacker to send POST or GET requests (with some controllable URL parameters) to private IPs, enabling further attacks on internal servers. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Rhymix before 2.1.24 is vulnerable to Server-Side Request Forgery (SSRF) in the background import data function because XML documents may contain external entities.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4 ("Bluetooth: Always request for user confirmation for Just Works") always request user confirmation with confirm_hint set since the likes of bluetoothd have dedicated policy around JUST_WORKS method (e.g. main.conf:JustWorksRepairing). CVE: CVE-2024-8805

Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.

Cross-Site Request Forgery (CSRF) vulnerability in vCita.com Online Booking & Scheduling Calendar for WordPress by vcita allows Cross Site Request Forgery.This issue affects Online Booking & Scheduling Calendar for WordPress by vcita: from n/a through 4.5.

A vulnerability was found in InvoicePlane up to 1.6.1. It has been declared as critical. This vulnerability affects the function upload_file of the file /index.php/upload/upload_file/1/1. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.2-beta-1 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

A vulnerability was found in InvoicePlane up to 1.6.1. It has been classified as problematic. This affects the function download of the file invoices.php. The manipulation of the argument invoice leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.2-beta-1 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Mattermost versions 10.1.x <= 10.1.2, 10.0.x <= 10.0.2, 9.11.x <= 9.11.4, 9.5.x <= 9.5.12 fail to limit the file size for slack import file uploads which allows a user to cause a DoS via zip bomb by importing data in a team they are a team admin.

Mattermost versions 10.1.x <= 10.1.2, 10.0.x <= 10.0.2, 9.11.x <= 9.11.4, 9.5.x <= 9.5.12 fail to properly validate the type of callProps which allows a user to cause a client side (webapp and mobile) DoS to users of particular channels, by sending a specially crafted post.

Mattermost versions 10.1.x <= 10.1.2, 10.0.x <= 10.0.2, 9.11.x <= 9.11.4, and 9.5.x <= 9.5.12 fail to prevent concurrently checking and updating the failed login attempts. which allows an attacker to bypass of "Max failed attempts" restriction and send a big number of login attempts before being blocked via simultaneously sending multiple login requests

Missing Authorization vulnerability in Depicter Slider and Popup by Averta Depicter Slider allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Depicter Slider: from n/a through 1.9.0.

Missing Authorization vulnerability in JS Help Desk JS Help Desk – Best Help Desk & Support Plugin allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects JS Help Desk – Best Help Desk & Support Plugin: from n/a through 2.7.1.

The Responsive Filterable Portfolio plugin for WordPress is vulnerable to SQL Injection via the 'id' parameter in all versions up to, and including, 1.0.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.