CVE Database

In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.)

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: fs/dax: Fix "don't skip locked entries when scanning entries" Commit 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning entries") introduced a new function, wait_entry_unlocked_exclusive(), which waits for the current entry to become unlocked without advancing the XArray iterator state. Waiting for the entry to become unlocked requires dropping the XArray lock. This requires calling xas_pause() prior to dropping the lock which leaves the xas in a suitable state for the next iteration. However this has the side-effect of advancing the xas state to the next index. Normally this isn't an issue because xas_for_each() contains code to detect this state and thus avoid advancing the index a second time on the next loop iteration. However both callers of and wait_entry_unlocked_exclusive() itself subsequently use the xas state to reload the entry. As xas_pause() updated the state to the next index this will cause the current entry which is being waited on to be skipped. This caused the following warning to fire intermittently when running xftest generic/068 on an XFS filesystem with FS DAX enabled: [ 35.067397] ------------[ cut here ]------------ [ 35.068229] WARNING: CPU: 21 PID: 1640 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xd8/0x1e0 [ 35.069717] Modules linked in: nd_pmem dax_pmem nd_btt nd_e820 libnvdimm [ 35.071006] CPU: 21 UID: 0 PID: 1640 Comm: fstest Not tainted 6.15.0-rc7+ #77 PREEMPT(voluntary) [ 35.072613] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/204 [ 35.074845] RIP: 0010:truncate_folio_batch_exceptionals+0xd8/0x1e0 [ 35.075962] Code: a1 00 00 00 f6 47 0d 20 0f 84 97 00 00 00 4c 63 e8 41 39 c4 7f 0b eb 61 49 83 c5 01 45 39 ec 7e 58 42 f68 [ 35.079522] RSP: 0018:ffffb04e426c7850 EFLAGS: 00010202 [ 35.080359] RAX: 0000000000000000 RBX: ffff9d21e3481908 RCX: ffffb04e426c77f4 [ 35.081477] RDX: ffffb04e426c79e8 RSI: ffffb04e426c79e0 RDI: ffff9d21e34816e8 [ 35.082590] RBP: ffffb04e426c79e0 R08: 0000000000000001 R09: 0000000000000003 [ 35.083733] R10: 0000000000000000 R11: 822b53c0f7a49868 R12: 000000000000001f [ 35.084850] R13: 0000000000000000 R14: ffffb04e426c78e8 R15: fffffffffffffffe [ 35.085953] FS: 00007f9134c87740(0000) GS:ffff9d22abba0000(0000) knlGS:0000000000000000 [ 35.087346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.088244] CR2: 00007f9134c86000 CR3: 000000040afff000 CR4: 00000000000006f0 [ 35.089354] Call Trace: [ 35.089749] <TASK> [ 35.090168] truncate_inode_pages_range+0xfc/0x4d0 [ 35.091078] truncate_pagecache+0x47/0x60 [ 35.091735] xfs_setattr_size+0xc7/0x3e0 [ 35.092648] xfs_vn_setattr+0x1ea/0x270 [ 35.093437] notify_change+0x1f4/0x510 [ 35.094219] ? do_truncate+0x97/0xe0 [ 35.094879] do_truncate+0x97/0xe0 [ 35.095640] path_openat+0xabd/0xca0 [ 35.096278] do_filp_open+0xd7/0x190 [ 35.096860] do_sys_openat2+0x8a/0xe0 [ 35.097459] __x64_sys_openat+0x6d/0xa0 [ 35.098076] do_syscall_64+0xbb/0x1d0 [ 35.098647] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 35.099444] RIP: 0033:0x7f9134d81fc1 [ 35.100033] Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 2a 26 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff5 [ 35.102993] RSP: 002b:00007ffcd41e0d10 EFLAGS: 00000202 ORIG_RAX: 0000000000000101 [ 35.104263] RAX: ffffffffffffffda RBX: 0000000000000242 RCX: 00007f9134d81fc1 [ 35.105452] RDX: 0000000000000242 RSI: 00007ffcd41e1200 RDI: 00000000ffffff9c [ 35.106663] RBP: 00007ffcd41e1200 R08: 0000000000000000 R09: 0000000000000064 [ 35.107923] R10: 00000000000001a4 R11: 0000000000000202 R12: 0000000000000066 [ 35.109112] R13: 0000000000100000 R14: 0000000000100000 R15: 0000000000000400 [ 35.110357] </TASK> [ 35.110769] irq event stamp: 8415587 [ 35.111486] hardirqs last enabled at (8415599): [<ffffffff8d74b562>] __up_console_se ---truncated---

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling.

In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().

In the Linux kernel, the following vulnerability has been resolved: net: tipc: fix refcount warning in tipc_aead_encrypt syzbot reported a refcount warning [1] caused by calling get_net() on a network namespace that is being destroyed (refcount=0). This happens when a TIPC discovery timer fires during network namespace cleanup. The recently added get_net() call in commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to hold a reference to the network namespace. However, if the namespace is already being destroyed, its refcount might be zero, leading to the use-after-free warning. Replace get_net() with maybe_get_net(), which safely checks if the refcount is non-zero before incrementing it. If the namespace is being destroyed, return -ENODEV early, after releasing the bearer reference. [1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2

In the Linux kernel, the following vulnerability has been resolved: net: dsa: b53: do not enable EEE on bcm63xx BCM63xx internal switches do not support EEE, but provide multiple RGMII ports where external PHYs may be connected. If one of these PHYs are EEE capable, we may try to enable EEE for the MACs, which then hangs the system on access of the (non-existent) EEE registers. Fix this by checking if the switch actually supports EEE before attempting to configure it.

In the Linux kernel, the following vulnerability has been resolved: net: prevent a NULL deref in rtnl_create_link() At the time rtnl_create_link() is running, dev->netdev_ops is NULL, we must not use netdev_lock_ops() or risk a NULL deref if CONFIG_NET_SHAPER is defined. Use netif_set_group() instead of dev_set_group(). RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline] RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82 Call Trace: <TASK> rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674 rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813 __rtnl_newlink net/core/rtnetlink.c:3940 [inline] rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline]

In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely.

In the Linux kernel, the following vulnerability has been resolved: btrfs: exit after state insertion failure at btrfs_convert_extent_bit() If insert_state() state failed it returns an error pointer and we call extent_io_tree_panic() which will trigger a BUG() call. However if CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then we fallthrough and call cache_state() which will dereference the error pointer, resulting in an invalid memory access. So jump to the 'out' label after calling extent_io_tree_panic(), it also makes the code more clear besides dealing with the exotic scenario where CONFIG_BUG is disabled.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events and this triggers the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780 Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50 RSP: 0018:ffff888121787dc0 EFLAGS: 00010002 RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49 RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982 R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00 R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008 FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ring_buffer_map_get_reader+0x10/0x10 tracing_buffers_ioctl+0x283/0x370 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f95c8de48db Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006 RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90 </TASK> irq event stamp: 5080 hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70 hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70 softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710 softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210 ---[ end trace 0000000000000000 ]--- The above was triggered by running on a kernel with both lockdep and KASAN as well as kmemleak enabled and executing the following command: # perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50 With perf interjecting a lot of interrupts and trace-cmd enabling all events as well as function tracing, with lockdep, KASAN and kmemleak enabled, it could cause an interrupt preempting an event being written to add enough event ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") introduced an access to the 'soc' field of struct mtk_pinctrl in mtk_eint_do_init() and for that an include of pinctrl-mtk-common-v2.h. However, pinctrl drivers relying on the v1 common driver include pinctrl-mtk-common.h instead, which provides another definition of struct mtk_pinctrl that does not contain an 'soc' field. Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it will now try to dereference an invalid pointer when called on v1 platforms. This has been observed on Genio 350 EVK (MT8365), which crashes very early in boot (the kernel trace can only be seen with earlycon). In order to fix this, since 'struct mtk_pinctrl' was only needed to get a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter of mtk_eint_do_init() so that callers need to supply it, removing mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.

In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.

A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.

A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure. This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior.

In Dradis before 4.11.0, the Output Console shows a job queue that may contain information about other users' jobs.

Jenkins Applitools Eyes Plugin 1.16.5 and earlier does not mask Applitools API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Applitools Eyes Plugin 1.16.5 and earlier stores Applitools API keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins User1st uTester Plugin 1.1 and earlier stores the uTester JWT token unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Xooa Plugin 0.0.7 and earlier does not mask the Xooa Deployment Token on the global configuration form, increasing the potential for attackers to observe and capture it.

Jenkins Xooa Plugin 0.0.7 and earlier stores the Xooa Deployment Token unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Warrior Framework Plugin 1.2 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Sensedia Api Platform tools Plugin 1.0 does not mask the Sensedia API Manager integration token on the global configuration form, increasing the potential for attackers to observe and capture it.

Jenkins Sensedia Api Platform tools Plugin 1.0 stores the Sensedia API Manager integration token unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Kryptowire Plugin 0.2 and earlier stores the Kryptowire API key unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Nouvola DiveCloud Plugin 1.08 and earlier does not mask DiveCloud API Keys and Credentials Encryption Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Nouvola DiveCloud Plugin 1.08 and earlier stores DiveCloud API Keys and Credentials Encryption Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins VAddy Plugin 1.2.8 and earlier does not mask Vaddy API Auth Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins VAddy Plugin 1.2.8 and earlier stores Vaddy API Auth Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Dead Man's Snitch Plugin 0.1 does not mask Dead Man's Snitch tokens displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Dead Man's Snitch Plugin 0.1 stores Dead Man's Snitch tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Apica Loadtest Plugin 1.10 and earlier does not mask Apica Loadtest LTP authentication tokens displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Apica Loadtest Plugin 1.10 and earlier stores Apica Loadtest LTP authentication tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins IBM Cloud DevOps Plugin 2.0.16 and earlier stores SonarQube authentication tokens unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins IFTTT Build Notifier Plugin 1.2 and earlier stores IFTTT Maker Channel Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Testsigma Test Plan run Plugin 1.6 and earlier does not mask Testsigma API keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins QMetry Test Management Plugin 1.13 and earlier does not mask Qmetry Automation API Keys displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins QMetry Test Management Plugin 1.13 and earlier stores Qmetry Automation API Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Applitools Eyes Plugin 1.16.5 and earlier does not escape the Applitools URL on the build page, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

Jenkins ReadyAPI Functional Testing Plugin 1.11 and earlier does not mask SLM License Access Keys, client secrets, and passwords displayed on the job configuration form, increasing the potential for attackers to observe and capture them.

Jenkins ReadyAPI Functional Testing Plugin 1.11 and earlier stores SLM License Access Keys, client secrets, and passwords unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Statistics Gatherer Plugin 2.0.3 and earlier does not mask the AWS Secret Key on the global configuration form, increasing the potential for attackers to observe and capture it.

Jenkins Statistics Gatherer Plugin 2.0.3 and earlier stores the AWS Secret Key unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

Jenkins Aqua Security Scanner Plugin 3.2.8 and earlier stores Scanner Tokens for Aqua API unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

Jenkins Git Parameter Plugin 439.vb_0e46ca_14534 and earlier does not validate that the Git parameter value submitted to the build matches one of the offered choices, allowing attackers with Item/Build permission to inject arbitrary values into Git parameters.

Jenkins HTML Publisher Plugin 425 and earlier displays log messages that include the absolute paths of files archived during the Publish HTML reports post-build step, exposing information about the Jenkins controller file system in the build log.