In the Linux kernel, the following vulnerability has been resolved:
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
mrdump.ko ipanic() + 120
vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux atomic_notifier_call_chain(val=0) + 56
vmlinux panic() + 344
vmlinux add_taint() + 164
vmlinux end_report() + 136
vmlinux kasan_report(size=0) + 236
vmlinux report_tag_fault() + 16
vmlinux do_tag_recovery() + 16
vmlinux __do_kernel_fault() + 88
vmlinux do_bad_area() + 28
vmlinux do_tag_check_fault() + 60
vmlinux do_mem_abort() + 80
vmlinux el1_abort() + 56
vmlinux el1h_64_sync_handler() + 124
vmlinux > 0xFFFFFFC080011294()
vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux sock_put() + 48
vmlinux tcp6_check_fraglist_gro() + 236
vmlinux tcp6_gro_receive() + 624
vmlinux ipv6_gro_receive() + 912
vmlinux dev_gro_receive() + 1116
vmlinux napi_gro_receive() + 196
ccmni.ko ccmni_rx_callback() + 208
ccmni.ko ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088
vmlinux kthread() + 268
vmlinux 0xFFFFFFC08001F30C()
In the Linux kernel, the following vulnerability has been resolved:
mtd: inftlcore: Add error check for inftl_read_oob()
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.
Editions of Rapid7 AppSpider Pro before version 7.5.018 is vulnerable to a stored cross-site scripting vulnerability in the "ScanName" field.
Despite the application preventing the inclusion of special characters within the "ScanName" field, this could be bypassed by modifying the configuration file directly.
This is fixed as of version 7.5.018
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Pluggabl LLC Booster Plus for WooCommerce allows Reflected XSS.This issue affects Booster Plus for WooCommerce: from n/a through 7.2.4.
A flaw was found in the cookie parsing logic of the libsoup HTTP library, used in GNOME applications and other software. The vulnerability arises when processing the expiration date of cookies, where a specially crafted value can trigger an integer overflow. This may result in undefined behavior, allowing an attacker to bypass cookie expiration logic, causing persistent or unintended cookie behavior. The issue stems from improper validation of large integer inputs during date arithmetic operations within the cookie parsing routines.
A flaw was found in the soup_multipart_new_from_message() function of the libsoup HTTP library, which is commonly used by GNOME and other applications to handle web communications. The issue occurs when the library processes specially crafted multipart messages. Due to improper validation, an internal calculation can go wrong, leading to an integer underflow. This can cause the program to access invalid memory and crash. As a result, any application or server using libsoup could be forced to exit unexpectedly, creating a denial-of-service (DoS) risk.
ConnectWise-Password-Encryption-Utility.exe in ConnectWise Risk Assessment allows an attacker to extract a hardcoded AES decryption key via reverse engineering. This key is embedded in plaintext within the binary and used in cryptographic operations without dynamic key management. Once obtained the key can be used to decrypt CSV input files used for authenticated network scanning.
The issue was addressed with improved checks. This issue is fixed in Safari 18.3, visionOS 2.3, iOS 18.3 and iPadOS 18.3, macOS Sequoia 15.3, watchOS 11.3, tvOS 18.3. Processing maliciously crafted web content may lead to memory corruption.
a-blog cms multiple versions neutralize logs improperly. If this vulnerability is exploited with CVE-2025-36560, a remote unauthenticated attacker may hijack a legitimate user's session.
Server-side request forgery vulnerability exists in a-blog cms multiple versions. If this vulnerability is exploited, a remote unauthenticated attacker may gain access to sensitive information by sending a specially crafted request.
Cross-site scripting vulnerability exists in a-blog cms versions prior to Ver. 3.1.43 and prior to Ver. 3.0.47. This issue exists in a specific field in the entry editing screen, and exploitation requires contributor or higher level privileges. If this vulnerability is exploited, an arbitrary script may be executed on the web browser of the user who is logging in to the product.
Path traversal vulnerability exists in a-blog cms versions prior to Ver. 3.1.43 and versions prior to Ver. 3.0.47. This is an issue with insufficient path validation in the backup feature, and exploitation requires the administrator privilege. If this vulnerability is exploited, a remote authenticated attacker with the administrator privilege may obtain or delete any file on the server.
Pgpool-II provided by PgPool Global Development Group contains an authentication bypass by primary weakness vulnerability. if the vulnerability is exploited, an attacker may be able to log in to the system as an arbitrary user, allowing them to read or tamper with data in the database, and/or disable the database.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
The Ninja Forms WordPress plugin before 3.10.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
The Ninja Forms WordPress plugin before 3.10.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
The Ninja Forms WordPress plugin before 3.10.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
The Qi Blocks WordPress plugin before 1.4 does not validate and escape some of its block options before outputting them back in a page/post where the block is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks.
The Qi Blocks WordPress plugin before 1.4 does not validate and escape some of its Countdown block options before outputting them back in a page/post where the block is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks.
The Qi Blocks WordPress plugin before 1.4 does not validate and escape some of its Counter block options before outputting them back in a page/post where the block is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks.
A vulnerability was found in code-projects Tourism Management System 1.0 and classified as critical. This issue affects the function LoginUser of the component Login User. The manipulation of the argument username/password leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in code-projects Tourism Management System 1.0 and classified as critical. This vulnerability affects the function AddUser of the component User Registration. The manipulation of the argument username/password leads to buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used.
An attacker was able to perform an out-of-bounds read or write on a JavaScript object by confusing array index sizes. This vulnerability affects Firefox < 138.0.4, Firefox ESR < 128.10.1, Firefox ESR < 115.23.1, Thunderbird < 128.10.2, and Thunderbird < 138.0.2.
An attacker was able to perform an out-of-bounds read or write on a JavaScript `Promise` object. This vulnerability affects Firefox < 138.0.4, Firefox ESR < 128.10.1, Firefox ESR < 115.23.1, Thunderbird < 128.10.2, and Thunderbird < 138.0.2.
A vulnerability classified as problematic has been found in y_project RuoYi 4.8.0. Affected is an unknown function of the file /monitor/online/batchForceLogout of the component Offline Logout. The manipulation of the argument ids leads to improper authorization. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.
Untrusted LD_LIBRARY_PATH environment variable vulnerability in the GNU C Library version 2.27 to 2.38 allows attacker controlled loading of dynamically shared library in statically compiled setuid binaries that call dlopen (including internal dlopen calls after setlocale or calls to NSS functions such as getaddrinfo).
A vulnerability classified as critical has been found in gongfuxiang schoolcms 2.3.1. This affects the function SaveInfo of the file /index.php?m=Admin&c=article&a=SaveInfo. The manipulation of the argument ID leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A flaw was found in the FreeRDP used by Anaconda's remote install feature, where a crafted RDP packet could trigger a segmentation fault. This issue causes the service to crash and remain defunct, resulting in a denial of service. It occurs pre-boot and is likely due to a NULL pointer dereference. Rebooting is required to recover the system.
Nextcloud Server is a self hosted personal cloud system. In Nextcloud Server prior to 29.0.13, 30.0.7, and 31.0.1 and Nextcloud Enterprise Server prior to 26.0.13.13, 27.1.11.13, 28.0.14.4, 29.0.13, 30.0.7, and 31.0.1, an attacker on a multi-user system may read temporary files from Nextcloud running with a different user account, or run a symlink attack. Nextcloud Server versions 29.0.13, 30.0.7, and 31.0.1 and Nextcloud Enterprise Server 26.0.13.13, 27.1.11.13, 28.0.14.4, 29.0.13, 30.0.7, and 31.0.1 fix the issue. No known workarounds are available.
Nextcloud Server is a self hosted personal cloud system. Nextcloud Server prior to 29.0.15, 30.0.9, and 31.0.3 and Nextcloud Enterprise Server prior to 26.0.13.15, 27.1.11.15, 28.0.14.6, 29.0.15, 30.0.9, and 31.0.3 have a bug with session handling. The bug caused skipping the second factor confirmation after a successful login with the username and password when the server was configured with `remember_login_cookie_lifetime` set to `0`, once the session expired on the page to select the second factor and the page is reloaded. Nextcloud Server 29.0.15, 30.0.9, and 31.0.3 and Nextcloud Enterprise Server is upgraded to 26.0.13.15, 27.1.11.15, 28.0.14.6, 29.0.15, 30.0.9 and 31.0.3 contain a patch. As a workaround, set the `remember_login_cookie_lifetime` in config.php to a value other than `0`, e.g. `900`. Beware that this is only a workaround for new sessions created after the configuration change. System administration can delete affected sessions.
In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc
As described in Gerrard's report [1], we have a UAF case when an hfsc class
has a netem child qdisc. The crux of the issue is that hfsc is assuming
that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted
the class in the vttree or eltree (which is not true for the netem
duplicate case).
This patch checks the n_active class variable to make sure that the code
won't insert the class in the vttree or eltree twice, catering for the
reentrant case.
[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/
Cross-site scripting (XSS) in Icewarp Mail Server affecting version 11.4.0. This vulnerability allows an attacker to modify the “lastLogin” cookie with malicious JavaScript code that will be executed when the page is rendered.
HTTP host header injection vulnerability in Icewarp Mail Server affecting version 11.4.0. By modifying the Host header and adding a payload, arbitrary JavaScript code can be executed on page load. The user must interact with a malicious link to be redirected.
Open redirection vulnerability in IceWarp Mail Server affecting version 11.4.0. This vulnerability allows an attacker to redirect a user to any domain by sending a malicious URL to the victim, for example “ https://icewarp.domain.com//<MALICIOUS_DOMAIN>/%2e%2e” https://icewarp.domain.com///%2e%2e” . This vulnerability has been tested in Firefox.
In libavif before 1.3.0, avifImageRGBToYUV in reformat.c has integer overflows in multiplications involving rgbRowBytes, yRowBytes, uRowBytes, and vRowBytes.
Execution with Unnecessary Privileges vulnerability in multiple services of Mitsubishi Electric GENESIS64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 all versions, Mitsubishi Electric ICONICS Suite all versions, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite all versions, Mitsubishi Electric MC Works64 all versions, Mitsubishi Electric GENESIS version 11.00, Mitsubishi Electric Iconics Digital Solutions GENESIS version 11.00, Mitsubishi Electric GENESIS32 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions, Mitsubishi Electric BizViz all versions, and Mitsubishi Electric Iconics Digital Solutions BizViz all versions allows a local authenticated attacker to make an unauthorized write to arbitrary files, by creating a symbolic link from a file used as a write destination by the services of the affected products to a target file. This could allow the attacker to destroy the file on a PC with the affected products installed, resulting in a denial-of-service (DoS) condition on the PC if the destroyed file is necessary for the operation of the PC.
Tornado is a Python web framework and asynchronous networking library. When Tornado's ``multipart/form-data`` parser encounters certain errors, it logs a warning but continues trying to parse the remainder of the data. This allows remote attackers to generate an extremely high volume of logs, constituting a DoS attack. This DoS is compounded by the fact that the logging subsystem is synchronous. All versions of Tornado prior to 6.5.0 are affected. The vulnerable parser is enabled by default. Upgrade to Tornado version 6.50 to receive a patch. As a workaround, risk can be mitigated by blocking `Content-Type: multipart/form-data` in a proxy.
Emlog is an open source website building system. Versions 2.5.13 and prior have a deserialization vulnerability. A user who creates a carefully crafted nickname can cause `str_replace` to replace the value of `name_orig` with empty, causing deserialization to fail and return `false`. Commit 9643250802188b791419e3c2188577073256a8a2 fixes the issue.
The Simple Job Board WordPress plugin before 2.12.6 does not prevent uploaded files from being listed, allowing unauthenticated users to access and download uploaded resumes
The DL Robots.txt WordPress plugin through 1.2 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
The Offload Videos WordPress plugin before 1.0.1 does not have CSRF check in place when updating its settings, which could allow low privilege users to update them via a CSRF attack
The Event Tickets with Ticket Scanner WordPress plugin before 2.3.8 does not sanitise and escape some parameters, which could allow users with a role as low as admin to perform Cross-Site Scripting attacks
The EventPrime WordPress plugin before 3.5.0 does not properly validate permissions when updating bookings, allowing users to change/cancel bookings for other users. Additionally, the feature is lacking a nonce.
The Responsive Gallery Grid WordPress plugin before 2.3.15 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Cross-Site Scripting attacks even when unfiltered_html is disallowed
The Advanced Cron Manager WordPress plugin before 2.5.7 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)
The Carousel, Slider, Gallery by WP Carousel WordPress plugin before 2.6.9 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)
The Smart Post Show WordPress plugin before 2.4.28 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)
The Genesis Blocks WordPress plugin through 3.1.3 does not properly escape attributes provided to some of its custom blocks, making it possible for users allowed to write posts (like those with the contributor role) to conduct Stored XSS attacks.