CVE Database

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix a race between readers and resize checks The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab792705c ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: move the EST lock to struct stmmac_priv Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c

In the Linux kernel, the following vulnerability has been resolved: net: micrel: Fix receiving the timestamp in the frame for lan8841 The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock.

In the Linux kernel, the following vulnerability has been resolved: netrom: fix possible dead-lock in nr_rt_ioctl() syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 but task is already holding lock: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (nr_node_list_lock){+...}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_node net/netrom/nr_route.c:299 [inline] nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355 nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&nr_node->node_lock){+...}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_node_list_lock); lock(&nr_node->node_lock); lock(nr_node_list_lock); lock(&nr_node->node_lock); *** DEADLOCK *** 1 lock held by syz-executor350/5129: #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] #0: ffffffff8f70 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().

In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential hang in nilfs_detach_log_writer() Syzbot has reported a potential hang in nilfs_detach_log_writer() called during nilfs2 unmount. Analysis revealed that this is because nilfs_segctor_sync(), which synchronizes with the log writer thread, can be called after nilfs_segctor_destroy() terminates that thread, as shown in the call trace below: nilfs_detach_log_writer nilfs_segctor_destroy nilfs_segctor_kill_thread --> Shut down log writer thread flush_work nilfs_iput_work_func nilfs_dispose_list iput nilfs_evict_inode nilfs_transaction_commit nilfs_construct_segment (if inode needs sync) nilfs_segctor_sync --> Attempt to synchronize with log writer thread *** DEADLOCK *** Fix this issue by changing nilfs_segctor_sync() so that the log writer thread returns normally without synchronizing after it terminates, and by forcing tasks that are already waiting to complete once after the thread terminates. The skipped inode metadata flushout will then be processed together in the subsequent cleanup work in nilfs_segctor_destroy().

In the Linux kernel, the following vulnerability has been resolved: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines.

In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - Fix pointer arithmetic In spu2_dump_omd() value of ptr is increased by ciph_key_len instead of hash_iv_len which could lead to going beyond the buffer boundaries. Fix this bug by changing ciph_key_len to hash_iv_len. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ecryptfs: Fix buffer size for tag 66 packet The 'TAG 66 Packet Format' description is missing the cipher code and checksum fields that are packed into the message packet. As a result, the buffer allocated for the packet is 3 bytes too small and write_tag_66_packet() will write up to 3 bytes past the end of the buffer. Fix this by increasing the size of the allocation so the whole packet will always fit in the buffer. This fixes the below kasan slab-out-of-bounds bug: BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0 Write of size 1 at addr ffff88800afbb2a5 by task touch/181 CPU: 0 PID: 181 Comm: touch Not tainted 6.6.13-gnu #1 4c9534092be820851bb687b82d1f92a426598dc6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2/GNU Guix 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4c/0x70 print_report+0xc5/0x610 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? kasan_complete_mode_report_info+0x44/0x210 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 kasan_report+0xc2/0x110 ? ecryptfs_generate_key_packet_set+0x7d6/0xde0 __asan_store1+0x62/0x80 ecryptfs_generate_key_packet_set+0x7d6/0xde0 ? __pfx_ecryptfs_generate_key_packet_set+0x10/0x10 ? __alloc_pages+0x2e2/0x540 ? __pfx_ovl_open+0x10/0x10 [overlay 30837f11141636a8e1793533a02e6e2e885dad1d] ? dentry_open+0x8f/0xd0 ecryptfs_write_metadata+0x30a/0x550 ? __pfx_ecryptfs_write_metadata+0x10/0x10 ? ecryptfs_get_lower_file+0x6b/0x190 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 ? __pfx_path_openat+0x10/0x10 do_filp_open+0x15e/0x290 ? __pfx_do_filp_open+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? _raw_spin_lock+0x86/0xf0 ? __pfx__raw_spin_lock+0x10/0x10 ? __kasan_check_write+0x18/0x30 ? alloc_fd+0xf4/0x330 do_sys_openat2+0x122/0x160 ? __pfx_do_sys_openat2+0x10/0x10 __x64_sys_openat+0xef/0x170 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f00a703fd67 Code: 25 00 00 41 00 3d 00 00 41 00 74 37 64 8b 04 25 18 00 00 00 85 c0 75 5b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 85 00 00 00 48 83 c4 68 5d 41 5c c3 0f 1f RSP: 002b:00007ffc088e30b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007ffc088e3368 RCX: 00007f00a703fd67 RDX: 0000000000000941 RSI: 00007ffc088e48d7 RDI: 00000000ffffff9c RBP: 00007ffc088e48d7 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000941 R13: 0000000000000000 R14: 00007ffc088e48d7 R15: 00007f00a7180040 </TASK> Allocated by task 181: kasan_save_stack+0x2f/0x60 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x25/0x40 __kasan_kmalloc+0xc5/0xd0 __kmalloc+0x66/0x160 ecryptfs_generate_key_packet_set+0x6d2/0xde0 ecryptfs_write_metadata+0x30a/0x550 ecryptfs_initialize_file+0x77/0x150 ecryptfs_create+0x1c2/0x2f0 path_openat+0x17cf/0x1ba0 do_filp_open+0x15e/0x290 do_sys_openat2+0x122/0x160 __x64_sys_openat+0xef/0x170 do_syscall_64+0x60/0xd0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline] carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline] carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> [2] Related syzkaller crashes:

In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: enable proper endpoint verification Syzkaller reports [1] hitting a warning about an endpoint in use not having an expected type to it. Fix the issue by checking for the existence of all proper endpoints with their according types intact. Sadly, this patch has not been tested on real hardware. [1] Syzkaller report: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> ar5523_cmd+0x41b/0x780 drivers/net/wireless/ath/ar5523/ar5523.c:275 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline] ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline] ar5523_probe+0x14b0/0x1d10 drivers/net/wireless/ath/ar5523/ar5523.c:1655 usb_probe_interface+0x30f/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_set_configuration+0x101d/0x1900 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xbe/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd8/0x2c0 drivers/usb/core/driver.c:293 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_new_device.cold+0x685/0x10ad drivers/usb/core/hub.c:2573 hub_port_connect drivers/usb/core/hub.c:5353 [inline] hub_port_connect_change drivers/usb/core/hub.c:5497 [inline] port_event drivers/usb/core/hub.c:5653 [inline] hub_event+0x26cb/0x45d0 drivers/usb/core/hub.c:5735 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks.

In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Ensure the copied buf is NUL terminated Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed.

In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add 0 size check to mtk_drm_gem_obj Add a check to mtk_drm_gem_init if we attempt to allocate a GEM object of 0 bytes. Currently, no such check exists and the kernel will panic if a userspace application attempts to allocate a 0x0 GBM buffer. Tested by attempting to allocate a 0x0 GBM buffer on an MT8188 and verifying that we now return EINVAL.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed.

In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).

In the Linux kernel, the following vulnerability has been resolved: bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0. In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called. roundup_pow_of_two is documented as undefined for 0. Fix it in the one caller that had this combination. The undefined behavior was detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4 Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x30 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec __roundup_pow_of_two+0x25/0x35 [bnxt_re] bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re] bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re] bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc+0x1b6/0x4f0 ? create_qp.part.0+0x128/0x1c0 [ib_core] ? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re] create_qp.part.0+0x128/0x1c0 [ib_core] ib_create_qp_kernel+0x50/0xd0 [ib_core] create_mad_qp+0x8e/0xe0 [ib_core] ? __pfx_qp_event_handler+0x10/0x10 [ib_core] ib_mad_init_device+0x2be/0x680 [ib_core] add_client_context+0x10d/0x1a0 [ib_core] enable_device_and_get+0xe0/0x1d0 [ib_core] ib_register_device+0x53c/0x630 [ib_core] ? srso_alias_return_thunk+0x5/0xfbef5 bnxt_re_probe+0xbd8/0xe50 [bnxt_re] ? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re] auxiliary_bus_probe+0x49/0x80 ? driver_sysfs_add+0x57/0xc0 really_probe+0xde/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8f/0xe0 bus_add_driver+0x146/0x220 driver_register+0x72/0xd0 __auxiliary_driver_register+0x6e/0xd0 ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] bnxt_re_mod_init+0x3e/0xff0 [bnxt_re] ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] do_one_initcall+0x5b/0x310 do_init_module+0x90/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x121/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x82/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode_prepare+0x149/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode+0x75/0x230 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x8e/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? __count_memcg_events+0x69/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events.constprop.0+0x1a/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1f0/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x34e/0x640 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4e5132821d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0 R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60 </TASK> ---[ end trace ]---

In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net: sched: sch_multiq: fix possible OOB write in multiq_tune() q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur.

The Image Optimizer, Resizer and CDN – Sirv plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the sirv_upload_file_by_chanks AJAX action in all versions up to, and including, 7.2.6. This makes it possible for authenticated attackers, with Contributor-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible.

An uncontrolled resource consumption vulnerability exists in the `upload-link` endpoint of mintplex-labs/anything-llm. This vulnerability allows attackers to cause a denial of service (DOS) by shutting down the server through sending invalid upload requests. Specifically, the server can be made to shut down by sending an empty body with a 'Content-Length: 0' header or by sending a body with arbitrary content, such as 'asdasdasd', with a 'Content-Length: 9' header. The vulnerability is reproducible by users with at least a 'Manager' role, sending a crafted request to any workspace. This issue indicates that a previous fix was not effective in mitigating the vulnerability.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Wait unconditionally after issuing EndXfer command Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information.

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called. First call (with valid attributes) sets dev->num_tc to a non zero value. Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen.

A denial of service vulnerability was found in the 389-ds-base LDAP server. This issue may allow an authenticated user to cause a server denial of service while attempting to log in with a user with a malformed hash in their password.

Lobe Chat is an open-source LLMs/AI chat framework. In affected versions if an attacker can successfully authenticate through SSO/Access Code, they can obtain the real backend API Key by modifying the base URL to their own attack URL on the frontend and setting up a server-side request. This issue has been addressed in version 0.162.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `Proxy-Authorization` HTTP header as one carrying authentication material and thus doesn't strip the header on cross-origin redirects. Because this is a highly unlikely scenario, we believe the severity of this vulnerability is low for almost all users. Out of an abundance of caution urllib3 will automatically strip the `Proxy-Authorization` header during cross-origin redirects to avoid the small chance that users are doing this on accident. Users should use urllib3's proxy support or disable automatic redirects to achieve safe processing of the `Proxy-Authorization` header, but we still decided to strip the header by default in order to further protect users who aren't using the correct approach. We believe the number of usages affected by this advisory is low. It requires all of the following to be true to be exploited: 1. Setting the `Proxy-Authorization` header without using urllib3's built-in proxy support. 2. Not disabling HTTP redirects. 3. Either not using an HTTPS origin server or for the proxy or target origin to redirect to a malicious origin. Users are advised to update to either version 1.26.19 or version 2.2.2. Users unable to upgrade may use the `Proxy-Authorization` header with urllib3's `ProxyManager`, disable HTTP redirects using `redirects=False` when sending requests, or not user the `Proxy-Authorization` header as mitigations.

In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe() When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions.

A defect was discovered in the Python “ssl” module where there is a memory race condition with the ssl.SSLContext methods “cert_store_stats()” and “get_ca_certs()”. The race condition can be triggered if the methods are called at the same time as certificates are loaded into the SSLContext, such as during the TLS handshake with a certificate directory configured. This issue is fixed in CPython 3.10.14, 3.11.9, 3.12.3, and 3.13.0a5.

The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries. CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior.

SQL Injection vulnerability in Online-Bookstore-Project-In-PHP v1.0 allows a local attacker to execute arbitrary code via the admin_delete.php component.

Certain EOL GeoVision devices fail to properly filter user input for the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

Netatalk before 3.2.1 has an off-by-one error and resultant heap-based buffer overflow because of setting ibuf[len] to '\0' in FPMapName in afp_mapname in etc/afpd/directory.c. 2.4.1 and 3.1.19 are also fixed versions.

Netatalk before 3.2.1 has an off-by-one error, and resultant heap-based buffer overflow and segmentation violation, because of incorrectly using FPLoginExt in BN_bin2bn in etc/uams/uams_dhx_pam.c. The original issue 1097 report stated: 'The latest version of Netatalk (v3.2.0) contains a security vulnerability. This vulnerability arises due to a lack of validation for the length field after parsing user-provided data, leading to an out-of-bounds heap write of one byte (\0). Under specific configurations, this can result in reading metadata of the next heap block, potentially causing a Denial of Service (DoS) under certain heap layouts or with ASAN enabled. ... The vulnerability is located in the FPLoginExt operation of Netatalk, in the BN_bin2bn function found in /etc/uams/uams_dhx_pam.c ... if (!(bn = BN_bin2bn((unsigned char *)ibuf, KEYSIZE, NULL))) ... threads ... [#0] Id 1, Name: "afpd", stopped 0x7ffff4304e58 in ?? (), reason: SIGSEGV ... [#0] 0x7ffff4304e58 mov BYTE PTR [r14+0x8], 0x0 ... mov rdx, QWORD PTR [rsp+0x18] ... afp_login_ext(obj=<optimized out>, ibuf=0x62d000010424 "", ibuflen=0xffffffffffff0015, rbuf=<optimized out>, rbuflen=<optimized out>) ... afp_over_dsi(obj=0x5555556154c0 <obj>).' 2.4.1 and 3.1.19 are also fixed versions.

Netatalk before 3.2.1 has an off-by-one error and resultant heap-based buffer overflow because of setting ibuf[PASSWDLEN] to '\0' in FPLoginExt in login in etc/uams/uams_pam.c. 2.4.1 and 3.1.19 are also fixed versions.

Nextcloud Server is a self hosted personal cloud system. Private shared calendar events' recurrence exceptions can be read by sharees. It is recommended that the Nextcloud Server is upgraded to 27.1.10 or 28.0.6 or 29.0.1 and that the Nextcloud Enterprise Server is upgraded to 27.1.10 or 28.0.6 or 29.0.1.

there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.