CVE Database

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60 Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963 CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564 Call Trace: kasan_report+0x93/0xc0 cachefiles_ondemand_daemon_read+0xb41/0xb60 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 116: kmem_cache_alloc+0x140/0x3a0 cachefiles_lookup_cookie+0x140/0xcd0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 792: kmem_cache_free+0xfe/0x390 cachefiles_put_object+0x241/0x480 fscache_cookie_state_machine+0x5c8/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_withdraw_cookie cachefiles_ondemand_clean_object(object) cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req msg->object_id = req->object->ondemand->ondemand_id ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req copy_to_user(_buffer, msg, n) xa_erase(&cache->reqs, id) complete(&REQ_A->done) ------ close(fd) ------ cachefiles_ondemand_fd_release cachefiles_put_object cachefiles_put_object kmem_cache_free(cachefiles_object_jar, object) REQ_A->object->ondemand->ondemand_id // object UAF !!! When we see the request within xa_lock, req->object must not have been freed yet, so grab the reference count of object before xa_unlock to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type Lion Ackermann reported that there is a race condition between namespace cleanup in ipset and the garbage collection of the list:set type. The namespace cleanup can destroy the list:set type of sets while the gc of the set type is waiting to run in rcu cleanup. The latter uses data from the destroyed set which thus leads use after free. The patch contains the following parts: - When destroying all sets, first remove the garbage collectors, then wait if needed and then destroy the sets. - Fix the badly ordered "wait then remove gc" for the destroy a single set case. - Fix the missing rcu locking in the list:set type in the userspace test case. - Use proper RCU list handlings in the list:set type. The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).

In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: vmci: prevent speculation leaks by sanitizing event in event_deliver() Coverity spotted that event_msg is controlled by user-space, event_msg->event_data.event is passed to event_deliver() and used as an index without sanitization. This change ensures that the event index is sanitized to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Only compile tested, no access to HW.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section.

In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree.

In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead.

The authentication system of Securepoint UTM mishandles OTP keys. This allows the bypassing of second-factor verification (when OTP is enabled) in both the administration web interface and the user portal. Affected versions include UTM 11.5 through 12.6.4 and Reseller Preview 12.7.0. The issue has been fixed in UTM 12.6.5 and 12.7.1.

The Wallet for WooCommerce plugin for WordPress is vulnerable to SQL Injection via the 'search[value]' parameter in all versions up to, and including, 1.5.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.

An Uncontrolled Resource Consumption vulnerability in the H.323 ALG (Application Layer Gateway) of  Juniper Networks Junos OS on SRX Series and MX Series with SPC3 and MS-MPC/MIC, allows an unauthenticated network-based attacker to send specific packets causing traffic loss leading to Denial of Service (DoS).  Continued receipt and processing of these specific packets will sustain the Denial of Service condition. The memory usage can be monitored using the below command.   user@host> show usp memory segment sha data objcache jsf  This issue affects SRX Series and MX Series with SPC3 and MS-MPC/MIC:  *  20.4 before 20.4R3-S10,  *  21.2 before 21.2R3-S6,  *  21.3 before 21.3R3-S5,  *  21.4 before 21.4R3-S6,  *  22.1 before 22.1R3-S4,  *  22.2 before 22.2R3-S2,  *  22.3 before 22.3R3-S1,  *  22.4 before 22.4R3,  *  23.2 before 23.2R2.

An Uncontrolled Resource Consumption vulnerability in the aftmand process of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to consume memory resources, resulting in a Denial of Service (DoS) condition. The processes do not recover on their own and must be manually restarted. This issue affects both IPv4 and IPv6.  Changes in memory usage can be monitored using the following CLI command: user@device> show system memory node <fpc slot> | grep evo-aftmann This issue affects Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * 21.3 versions before 21.3R3-S5-EVO,  * 21.4 versions before 21.4R3-S5-EVO,  * 22.1 versions before 22.1R3-S4-EVO,  * 22.2 versions before 22.2R3-S4-EVO, * 22.3 versions before 22.3R3-S3-EVO, * 22.4 versions before 22.4R2-S2-EVO, 22.4R3-EVO,  * 23.2 versions before 23.2R1-S1-EVO, 23.2R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the the IKE daemon (iked) of Juniper Networks Junos OS on SRX Series, MX Series with SPC3 and NFX350 allows allows an unauthenticated, network-based attacker sending specific mismatching parameters as part of the IPsec negotiation to trigger an iked crash leading to Denial of Service (DoS). This issue is applicable to all platforms that run iked. This issue affects Junos OS on SRX Series, MX Series with SPC3 and NFX350:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S7,  * from 22.1 before 22.1R3-S2,  * from 22.2 before 22.2R3-S1,  * from 22.3 before 22.3R2-S1, 22.3R3,  * from 22.4 before 22.4R1-S2, 22.4R2, 22.4R3.

An Improper Handling of Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX 7000 Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS). If a value is configured for DDoS bandwidth or burst parameters for any protocol in a queue, all protocols which share the same queue will have their bandwidth or burst value changed to the new value. If, for example, OSPF was configured with a certain bandwidth value, ISIS would also be limited to this value. So inadvertently either the control plane is open for a high level of specific traffic which was supposed to be limited to a lower value, or the limit for a certain protocol is so low that chances to succeed with a volumetric DoS attack are significantly increased.  This issue affects Junos OS Evolved on ACX 7000 Series: * All versions before 21.4R3-S7-EVO, * 22.1 versions before 22.1R3-S6-EVO,  * 22.2 versions before 22.2R3-S3-EVO, * 22.3 versions before 22.3R3-S3-EVO,  * 22.4 versions before 22.4R3-S2-EVO, * 23.2 versions before 23.2R2-EVO, * 23.4 versions before 23.4R1-S1-EVO, 23.4R2-EVO.

VNote is a note-taking platform. Prior to 3.18.1, a code execution vulnerability existed in VNote, which allowed an attacker to execute arbitrary programs on the victim's system. A crafted URI can be used in a note to perform this attack using file:/// as a link. For example, file:///C:/WINDOWS/system32/cmd.exe. This allows attackers to execute arbitrary programs by embedding a reference to a local executable file such as file:///C:/WINDOWS/system32/cmd.exe and file:///C:/WINDOWS/system32/calc.exe. This vulnerability can be exploited by creating and sharing specially crafted notes. An attacker could send a crafted note file and perform further attacks. This vulnerability is fixed in 3.18.1.

The WP ERP plugin for WordPress is vulnerable to SQL Injection via the ‘vendor_id’ and 'status' parameter in all versions up to, and including, 1.13.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Accounting Manager access (erp_ac_view_sales_summary capability) and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The FULL – Cliente plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the license plan parameter in all versions up to, and including, 3.1.12 due to insufficient input sanitization and output escaping as well as missing authorization and capability checks on the related functions. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that will execute whenever an administrative user accesses wp-admin dashboard

An Improper Neutralization of Data within XPath Expressions ('XPath Injection') vulnerability in J-Web shipped with Juniper Networks Junos OS allows an unauthenticated, network-based attacker to execute remote commands on the target device.  While an administrator is logged into a J-Web session or has previously logged in and subsequently logged out of their J-Web session, the attacker can arbitrarily execute commands on the target device with the other user's credentials. In the worst case, the attacker will have full control over the device. This issue affects Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S7, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2, * from 23.4 before 23.4R1-S1, 23.4R2.

Decidim is a participatory democracy framework. The pagination feature used in searches and filters is subject to potential XSS attack through a malformed URL using the GET parameter `per_page`. This vulnerability is fixed in 0.27.6 and 0.28.1.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Automattic Newspack Blocks.This issue affects Newspack Blocks: from n/a through 3.0.8.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Membership Software WishList Member X.This issue affects WishList Member X: from n/a before 3.26.7.

Vulnerability in Jaspersoft JasperReport Servers.This issue affects JasperReport Servers: from 8.0.4 through 9.0.0.

Out-of-bounds write vulnerability exists in Ricoh MFPs and printers. If a remote attacker sends a specially crafted request to the affected products, the products may be able to cause a denial-of-service (DoS) condition and/or user's data may be destroyed.

Improper handling of insufficient permissions or privileges vulnerability exists in ajaxterm module of Webmin prior to 2.003. If this vulnerability is exploited, a console session may be hijacked by an unauthorized user. As a result, data within a system may be referred, a webpage may be altered, or a server may be permanently halted.

The ProfileGrid – User Profiles, Groups and Communities plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 5.8.9. This is due to a lack of validation on user-supplied data in the 'pm_upload_image' AJAX action. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update their user capabilities to Administrator.

An issue was discovered in Django 5.0 before 5.0.7 and 4.2 before 4.2.14. get_supported_language_variant() was subject to a potential denial-of-service attack when used with very long strings containing specific characters.

An issue was discovered in Django 4.2 before 4.2.14 and 5.0 before 5.0.7. urlize and urlizetrunc were subject to a potential denial of service attack via certain inputs with a very large number of brackets.

All versions of the package speaker are vulnerable to Denial of Service (DoS) when providing unexpected input types to the channels property of the Speaker object makes it possible to reach an assert macro. Exploiting this vulnerability can lead to a process crash.

All versions of the package node-twain are vulnerable to Improper Check or Handling of Exceptional Conditions due to the length of the source data not being checked. Creating a new twain.TwainSDK with a productName or productFamily, manufacturer, version.info property of length >= 34 chars leads to a buffer overflow vulnerability.

All versions of the package images are vulnerable to Denial of Service (DoS) due to providing unexpected input types to several different functions. This makes it possible to reach an assert macro, leading to a process crash. **Note:** By providing some specific integer values (like 0) to the size function, it is possible to obtain a Segmentation fault error, leading to the process crash.

All versions of the package audify are vulnerable to Improper Validation of Array Index when frameSize is provided to the new OpusDecoder().decode or new OpusDecoder().decodeFloat functions it is not checked for negative values. This can lead to a process crash.

All versions of the package @discordjs/opus are vulnerable to Denial of Service (DoS) due to providing an input object with a property toString to several different functions. Exploiting this vulnerability could lead to a system crash.

The Houzez CRM plugin for WordPress is vulnerable to time-based SQL Injection via the notes ‘belong_to’ parameter in all versions up to, and including, 1.4.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Custom-level (seller) access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

The Advanced File Manager Shortcodes plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.4. This makes it possible for attackers with contributor access or higher to read the contents of arbitrary files on the server, which can contain sensitive information.

The Advanced File Manager Shortcodes plugin for WordPress is vulnerable to arbitrary file uploads in all versions up to, and including, 2.5.3. This makes it possible for authenticated attackers with contributor access or above to upload arbitrary files on the affected site's server which may make remote code execution possible.

The application zips all the files in the folder specified by the user, which allows an attacker to read arbitrary files on the system by providing a crafted path. This vulnerability can be exploited by sending a request to the application with a malicious snapshot_path parameter.

An issue in ifood Order Manager v3.35.5 'Gestor de Peddios.exe' allows attackers to execute arbitrary code via a DLL hijacking attack.

Incorrect access control in BookStack before v24.05.1 allows attackers to confirm existing system users and perform targeted notification email DoS via public facing forms.

An issue in Outline <= v0.76.1 allows attackers to execute a session hijacking attack via user interaction with a crafted magic sign-in link.

Lime Survey <= 6.5.12 is vulnerable to Cross Site Request Forgery (CSRF). The YII_CSRF_TOKEN is only checked when passed in the body of POST requests, but the same check isn't performed in the equivalent GET requests.

Tencent RapidJSON is vulnerable to privilege escalation due to an integer overflow in the `GenericReader::ParseNumber()` function of `include/rapidjson/reader.h` when parsing JSON text from a stream. An attacker needs to send the victim a crafted file which needs to be opened; this triggers the integer overflow vulnerability (when the file is parsed), leading to elevation of privilege.

Tencent RapidJSON is vulnerable to privilege escalation due to an integer underflow in the `GenericReader::ParseNumber()` function of `include/rapidjson/reader.h` when parsing JSON text from a stream. An attacker needs to send the victim a crafted file which needs to be opened; this triggers the integer underflow vulnerability (when the file is parsed), leading to elevation of privilege.

Windows MSHTML Platform Spoofing Vulnerability

Microsoft SharePoint Remote Code Execution Vulnerability

Windows Hyper-V Elevation of Privilege Vulnerability

Multiple Exposure of sensitive information to an unauthorized actor weaknesses [CWE-200] vulnerability in Fortinet FortiAIOps 2.0.0 may allow an authenticated, remote attacker to retrieve sensitive information from the API endpoint or log files.

Multiple cross-site request forgery (CSRF) weaknesses [CWE-352] vulnerability in Fortinet FortiAIOps 2.0.0 may allow an unauthenticated remote attacker to perform arbitrary actions on behalf of an authenticated user via tricking the victim to execute malicious GET requests.

Multiple insufficient session expiration weaknesses [CWE-613] vulnerability in Fortinet FortiAIOps 2.0.0 may allow an attacker to re-use stolen old session tokens to perform unauthorized operations via crafted requests.

When almost out-of-memory an elliptic curve key which was never allocated could have been freed again. This vulnerability affects Firefox < 128 and Thunderbird < 128.

phonenumber is a library for parsing, formatting and validating international phone numbers. Since 0.3.4, the phonenumber parsing code may panic due to a panic-guarded out-of-bounds access on the phonenumber string. In a typical deployment of rust-phonenumber, this may get triggered by feeding a maliciously crafted phonenumber, e.g. over the network, specifically strings of the form `+dwPAA;phone-context=AA`, where the "number" part potentially parses as a number larger than 2^56. This vulnerability is fixed in 0.3.6.