A vulnerability was determined in vercel ai up to 3.0.97. The impacted element is the function createJsonResponseHandler/createJsonErrorResponseHandler of the file packages/provider-utils/src/response-handler.ts of the component provider-utils. This manipulation causes resource consumption. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in vercel ai up to 3.0.97. Impacted is the function run of the file .github/workflows/prettier-on-automerge.yml of the component PR Branch Name Interpolation. The manipulation leads to os command injection. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in Kilo-Org kilocode up to 7.0.47. This issue affects the function Load of the file packages/opencode/src/config/config.ts of the component Environment Variable Handler. Executing a manipulation of the argument KILO_CONFIG_CONTENT can lead to information disclosure. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was detected in Kilo-Org kilocode up to 7.0.47. This vulnerability affects the function Bun.file of the file packages/opencode/src/kilocode/review/worktree-diff.ts of the component File Diff API Endpoint. Performing a manipulation of the argument File results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was detected in AstrBotDevs AstrBot up to 4.23.5. Impacted is the function post_file of the file astrbot/dashboard/routes/chat.py of the component File Upload Handler. The manipulation of the argument filename results in path traversal. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 4.23.6 is recommended to address this issue. The patch is identified as aaec41e5054569ceaa1113593a34da7568e2d211. You should upgrade the affected component.
A security vulnerability has been detected in kalcaddle Kodbox up to 1.64. This issue affects the function parseVideoInfo of the file /workspace/source-code/plugins/fileThumb/lib/VideoResize.class.php of the component fileThumb Plugin. The manipulation of the argument ffmpegBin leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Joomla JoomOCShop 1.0 contains a cross-site request forgery vulnerability that allows attackers to perform unauthorized actions on behalf of authenticated users. Attackers can craft malicious HTML forms targeting account endpoints like /joomoc2/?route=account/edit and to modify user information or reset passwords without user consent.
jCart for OpenCart 2.3.0.2 contains a cross-site request forgery vulnerability that allows attackers to modify user account information without authentication. Attackers can craft malicious HTML forms targeting endpoints , and to change user credentials, passwords, and affiliate account details when victims visit the attacker-controlled page.
Zechat 1.5 contains a Cross-Site Request Forgery (CSRF) vulnerability that allows an attacker to change a user's information by bypassing anti-CSRF protections. The application uses a CSRF token, but an attacker can use the hashtag parameter to inject an encoded payload and bypass the CSRF protection, allowing for unauthorized changes to user data. This can be exploited by tricking a user into submitting a crafted form or by using a script to obtain and set the CSRF token.
Zenar Content Management System contains a cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by manipulating form parameters in POST requests. Attackers can inject script tags through the current_page parameter sent to the ajax.php endpoint, which reflects unsanitized user input in the response HTML to execute arbitrary JavaScript in victim browsers.
Joomla! Component Js Jobs 1.2.0 contains a cross-site request forgery vulnerability that allows attackers to perform state-changing actions without token validation. Attackers can craft malicious HTML forms targeting administrative endpoints like job.jobenforcedelete to delete job entries or modify component settings when administrators visit attacker-controlled pages.
Simple Fields 0.2 through 0.3.5 WordPress Plugin contains a local file inclusion vulnerability that allows unauthenticated attackers to read arbitrary files by injecting null bytes into the wp_abspath parameter on PHP versions before 5.3.4. Attackers can supply malicious wp_abspath values to simple_fields.php to include files like /etc/passwd or inject PHP code into Apache logs for remote code execution when allow_url_include is enabled.
TP-Link TL-WR720N wireless router contains a cross-site request forgery vulnerability that allows attackers to perform unauthorized administrative actions by crafting malicious web requests. Attackers can modify port forwarding rules via VirtualServerRpm.htm or change WiFi security settings via WlanSecurityRpm.htm by tricking authenticated users into visiting attacker-controlled pages.
A weakness has been identified in h2oai h2o-3 up to 7402. This vulnerability affects the function exec of the file h2o-core/src/main/java/water/rapids/ast/prims/misc/AstSetProperty.java of the component Rapids setproperty Primitive Handler. Executing a manipulation can lead to improper access controls. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in h2oai h2o-3 up to 7402. Affected by this issue is the function importFiles of the file h2o-core/src/main/java/water/persist/PersistNFS.java of the component ImportFile API. Such manipulation leads to information disclosure. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in Z-BlogPHP 1.7.4.3430. This affects the function CheckComment of the file zb_system/function/c_system_event.php of the component Commend Approval Handler. This manipulation causes improper authorization. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.
A security flaw has been discovered in Open5GS up to 2.7.7. Affected by this issue is the function discover_handler in the library /lib/sbi/nghttp2-server.c of the component NRF. The manipulation results in use after free. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was identified in Open5GS up to 2.7.7. Affected by this vulnerability is the function ogs_timer_add in the library /src/ausf/nausf-handler.c of the component AUSF. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was determined in Open5GS up to 2.7.7. Affected is the function ogs_sbi_subscription_data_add/ogs_sbi_nf_service_add in the library /lib/sbi/context.c of the component NRF. Executing a manipulation can lead to denial of service. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 819db11a08b9736a3576c4f99ceb28f7eb99523a. A patch should be applied to remediate this issue.
A vulnerability was found in Open5GS up to 2.7.6. This impacts the function ran_ue_find_by_amf_ue_ngap_id of the file src/amf/context.c of the component AMF/MME. Performing a manipulation results in improper authorization. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The patch is named 5746b8576cfceec18ed87eb7d8cf11b1fb4cd8b1. It is suggested to install a patch to address this issue.
A flaw has been found in Sanluan PublicCMS 5.202506.d. The impacted element is the function execute of the file publiccms-core/src/main/java/com/publiccms/views/directive/tools/TemplateResultDirective.java of the component templateResult API. This manipulation of the argument templateContent causes improper neutralization of special elements used in a template engine. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was detected in Sanluan PublicCMS 5.202506.d. The affected element is the function getSignKey of the file publiccms-core/src/main/java/com/publiccms/logic/component/config/SafeConfigComponent.java. The manipulation of the argument privatefile_key results in use of hard-coded cryptographic key
. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A security vulnerability has been detected in Sanluan PublicCMS 5.202506.d. Impacted is the function TradeOrderController.pay/TradePaymentController.pay/AccountGatewayComponent.pay of the file publiccms-trade/src/main/java/com/publiccms/controller/web/trade/TradeOrderController.java of the component Trade Payment Flow. The manipulation leads to business logic errors. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in Sanluan PublicCMS 5.202506.d. This issue affects the function execute of the file publiccms-trade/src/main/java/com/publiccms/views/directive/trade/TradeAddressListDirective.java of the component Trade Address Query Handler. Executing a manipulation of the argument userId/id can lead to missing authentication. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in Oinone Pamirs up to 7.2.0. This vulnerability affects the function request.getParameter of the file LocalFileClient.java of the component RestController. Performing a manipulation of the argument uniqueFileName results in path traversal. The attack may be carried out on the physical device. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was identified in Oinone Pamirs up to 7.2.0. This affects the function JsonUtils.parseMap of the file PamirsParserConfig.java of the component appConfigQuery Interface. Such manipulation leads to deserialization. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Investintech SlimPDFReader up to 2.0.13. Affected by this vulnerability is the function sub_3B4610 of the file SlimPDFReader.exe. The manipulation results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor responded to the initial vulnerability report by the researcher with a note that the product is discontinued. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in Open5GS up to 2.7.7. Affected is the function ogs_sbi_client_add in the library /lib/sbi/client.c of the component NRF. The manipulation of the argument client_pool leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A flaw has been found in Open5GS up to 2.7.6. This impacts the function ogs_sbi_nf_instance_set_id in the library /lib/sbi/context.c of the component NRF. Executing a manipulation of the argument nfInstanceId can lead to denial of service. The attack may be performed from remote. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was detected in Open5GS up to 2.7.7. This affects an unknown function in the library /lib/sbi/message.c of the component NRF. Performing a manipulation of the argument service-names/snssais results in denial of service. The attack is possible to be carried out remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A security vulnerability has been detected in Open5GS up to 2.7.7. The impacted element is the function ogs_sbi_discovery_option_parse_plmn_list in the library /lib/sbi/conv.c of the component NRF. Such manipulation of the argument target-plmn-list leads to denial of service. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A security flaw has been discovered in Dataease 2.10.20. Impacted is the function SqlparserUtils.transFilter of the file SqlparserUtils.java of the component Data Dashboard. The manipulation results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure.
### Summary
`qs.stringify` throws `TypeError` when called with `arrayFormat: 'comma'` and `encodeValuesOnly: true` on an array containing `null` or `undefined`. The throw is synchronous and not handled by any of qs's null-related options (`skipNulls`, `strictNullHandling`).
### Details
In the comma + `encodeValuesOnly` branch, `lib/stringify.js:145` mapped the array through the raw encoder before joining:
```js
obj = utils.maybeMap(obj, encoder);
```
`utils.encode` (`lib/utils.js:195`) reads `str.length` with no null guard, so a `null` or `undefined` element throws `TypeError`. `skipNulls` and `strictNullHandling` are both checked in the per-element loop below this line and never get a chance to run.
Same class of bug as the filter-array path fixed in 0c180a4. The vulnerable shape of the comma + `encodeValuesOnly` branch was introduced in 4c4b23d ("encode comma values more consistently", PR #463, 2023-01-19), first released in v6.11.1.
#### PoC
```js
const qs = require('qs');
qs.stringify({ a: [null, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true });
qs.stringify({ a: [undefined, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true });
qs.stringify({ a: [null] }, { arrayFormat: 'comma', encodeValuesOnly: true });
// TypeError: Cannot read properties of null (reading 'length')
// at encode (lib/utils.js:195:13)
// at Object.maybeMap (lib/utils.js:322:37)
// at stringify (lib/stringify.js:145:25)
```
#### Fix
`lib/stringify.js:145`, applied in 21f80b3 on `main` and released as v6.15.2:
```diff
- obj = utils.maybeMap(obj, encoder);
+ obj = utils.maybeMap(obj, function (v) {
+ return v == null ? v : encoder(v);
+ });
```
`null` and `undefined` now pass through `maybeMap` unchanged and reach the `join(',')` step as-is. For `{ a: [null, 'b'] }` this produces `a=,b`, matching the non-`encodeValuesOnly` comma path (which already joins before encoding and produces `a=%2Cb` for the same input). Single-element `[null]` arrays still collapse via the existing `obj.join(',') || null` and remain subject to `skipNulls` / `strictNullHandling` in the main loop.
### Affected versions
`>=6.11.1 <6.15.2` — fixed in v6.15.2.
The vulnerable code shape was introduced in 4c4b23d and first shipped in v6.11.1. Earlier versions — including all of 6.7.x, 6.8.x, 6.9.x, 6.10.x, and 6.11.0 — implemented the comma + `encodeValuesOnly` path differently (joining before encoding) and are not affected. Empirically verified across released versions.
### Impact
Application code that calls `qs.stringify` with both `arrayFormat: 'comma'` and `encodeValuesOnly: true` (both non-default) on input that may contain a `null` or `undefined` array element will throw synchronously instead of producing a query string. In a typical Node.js HTTP framework (Express, Fastify, Koa, hapi) the sync throw is caught by the framework's error boundary and the affected request returns a 500; the worker process does not exit and subsequent requests are unaffected. The "kills the worker process" framing applies only to call sites outside a request-handler error boundary (background jobs, startup paths, stream pipelines) or to deployments with framework error handling explicitly disabled.
The vulnerable input is a `null` or `undefined` entry inside an array; this is reachable from JSON request bodies or from application code constructing arrays from user input, but not from standard HTML form submissions (which produce strings or omitted fields, not literal `null`).
Quick.CMS 6.7 contains a cross-site scripting vulnerability in the sliders form that allows authenticated attackers to inject malicious scripts by submitting XSS payloads through the sDescription parameter. Attackers can craft CSRF forms targeting the admin.php?p=sliders-form endpoint to execute arbitrary JavaScript in victim browsers when the form is submitted.
ProcessMaker 3.5.4 contains a local file inclusion vulnerability that allows unauthenticated attackers to read arbitrary files by exploiting improper path traversal validation. Attackers can send requests with directory traversal sequences to access sensitive system files like /etc/passwd without authentication.
Cookie Law Bar 1.2.1 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject malicious scripts by submitting unsanitized input to the Bar Message field. Attackers can inject script payloads through the plugin settings page that execute in the browsers of all WordPress users viewing the site, enabling cookie theft and sensitive data exfiltration.
CouchCMS 2.2.1 contains a cross-site scripting vulnerability that allows authenticated attackers to execute arbitrary JavaScript by uploading malicious SVG files through the file upload functionality. Attackers can upload SVG files containing embedded script tags to the browse.php endpoint, which are then executed in users' browsers when the files are accessed or previewed.
MyBB Timeline Plugin 1.0 contains cross-site scripting vulnerabilities that allow attackers to inject malicious scripts through thread titles, post content, and user profile fields like Location and Bio. Attackers can also exploit a cross-site request forgery vulnerability in the timeline.php profile action to change a user's cover picture by crafting malicious forms that execute when victims visit affected profiles.
Supsystic Backup 2.3.9 contains a local file inclusion vulnerability that allows unauthenticated attackers to read and delete arbitrary files by manipulating the download path parameter. Attackers can modify the download parameter in admin.php requests with directory traversal sequences to access sensitive files like /etc/passwd or delete files via the removeAction parameter.
bloofoxCMS 0.5.2.1 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions by tricking logged-in users into visiting malicious pages. Attackers can craft hidden forms targeting the admin user creation endpoint to add new administrative accounts with arbitrary credentials without requiring explicit user consent.
Queue Management System 4.0.0 contains a stored cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through user creation fields. Attackers can insert JavaScript payloads in the First Name, Last Name, and Email fields during user creation, which execute when viewing the User List page.
CMS Made Simple 2.2.15 contains a stored cross-site scripting vulnerability that allows authenticated users with Content Manager access to inject malicious scripts through SVG file uploads. Attackers can upload SVG files containing embedded JavaScript to the file manager, which executes when other authenticated users access the uploaded file, enabling cookie theft and session hijacking.
Composr CMS 10.0.34 contains a persistent cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through the banner management interface. Attackers with admin credentials can inject XSS payloads in the Description field of the Add banner functionality, which execute for all website visitors when they access the home page.
NewsLister contains an authenticated persistent cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through the title parameter in the news addition interface. Attackers can inject JavaScript payloads via the title field in the admin panel that execute when news items are viewed by other users.
WordPress Theme Wibar 1.1.8 contains a stored cross-site scripting vulnerability in the Brand component that allows authenticated users to inject malicious scripts by manipulating the Logo URL parameter. Attackers with editor, administrator, contributor, or author privileges can inject base64-encoded script payloads through the ftc_brand_url input field to execute arbitrary JavaScript when users visit the brand page.
Internet Download Manager 6.38.12 contains a buffer overflow vulnerability in the Scheduler component that allows local attackers to crash the application by supplying oversized input. Attackers can paste malicious data exceeding 5000 bytes into the 'Open the following file when done' field to trigger a denial of service condition.
WordPress Plugin Buddypress 6.2.0 contains a persistent cross-site scripting vulnerability that allows authenticated attackers with moderator privileges to inject malicious script code through the figure parameter in wp:html blocks. Attackers can inject iframe elements with event handlers like onload that execute when administrators or privileged users preview or view the affected page content, enabling session hijacking and persistent phishing attacks.
Net::Statsd::Lite versions before 0.9.0 for Perl allowed metric injections.
The metric names were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
The Multicollab: Content Team Collaboration and Editorial Workflow plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'cf_add_comment' function in all versions up to, and including, 5.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to add comments to arbitrary collaborations.
Versions of the package jsondiffpatch before 0.7.6 are vulnerable to Cross-site Scripting (XSS) via the annotated formatter due to improper sanitization of JSON values and property names. If an application compares untrusted JSON/object data and renders annotated formatter output in the DOM, attacker-controlled HTML can be interpreted by the browser, resulting in XSS.