CVE Database

In the Linux kernel, the following vulnerability has been resolved: vfio/pds: Fix missing detach_ioas op When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci driver, the following WARN_ON() trace is seen and probe fails: WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio] <...> pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22 This is because the driver's vfio_device_ops.detach_ioas isn't set. Fix this by using the generic vfio_iommufd_physical_detach_ioas function.

In the Linux kernel, the following vulnerability has been resolved: PCI: pnv_php: Clean up allocated IRQs on unplug When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec [bhelgaas: tidy comments]

In the Linux kernel, the following vulnerability has been resolved: PCI: pnv_php: Fix surprise plug detection and recovery The existing PowerNV hotplug code did not handle surprise plug events correctly, leading to a complete failure of the hotplug system after device removal and a required reboot to detect new devices. This comes down to two issues: 1) When a device is surprise removed, often the bridge upstream port will cause a PE freeze on the PHB. If this freeze is not cleared, the MSI interrupts from the bridge hotplug notification logic will not be received by the kernel, stalling all plug events on all slots associated with the PE. 2) When a device is removed from a slot, regardless of surprise or programmatic removal, the associated PHB/PE ls left frozen. If this freeze is not cleared via a fundamental reset, skiboot is unable to clear the freeze and cannot retrain / rescan the slot. This also requires a reboot to clear the freeze and redetect the device in the slot. Issue the appropriate unfreeze and rescan commands on hotplug events, and don't oops on hotplug if pci_bus_to_OF_node() returns NULL. [bhelgaas: tidy comments]

In the Linux kernel, the following vulnerability has been resolved: net: drop UFO packets in udp_rcv_segment() When sending a packet with virtio_net_hdr to tun device, if the gso_type in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr size, below crash may happen. ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:4572! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:skb_pull_rcsum+0x8e/0xa0 Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000 RSP: 0018:ffffc900001fba38 EFLAGS: 00000297 RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948 RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062 RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000 R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900 FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0 Call Trace: <TASK> udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445 udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475 udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626 __udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690 ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233 ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579 ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636 ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670 __netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067 netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210 napi_complete_done+0x78/0x180 net/core/dev.c:6580 tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909 tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984 vfs_write+0x300/0x420 fs/read_write.c:593 ksys_write+0x60/0xd0 fs/read_write.c:686 do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63 </TASK> To trigger gso segment in udp_queue_rcv_skb(), we should also set option UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try to pull udphdr, but the skb size has been segmented to gso size, which leads to this crash. Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") introduces segmentation in UDP receive path only for GRO, which was never intended to be used for UFO, so drop UFO packets in udp_rcv_segment().

In the Linux kernel, the following vulnerability has been resolved: md: make rdev_addable usable for rcu mode Our testcase trigger panic: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Workqueue: md_misc md_start_sync RIP: 0010:rdev_addable+0x4d/0xf0 ... Call Trace: <TASK> md_start_sync+0x329/0x480 process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x14d/0x180 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: raid10 CR2: 00000000000000e0 ---[ end trace 0000000000000000 ]--- RIP: 0010:rdev_addable+0x4d/0xf0 md_spares_need_change in md_start_sync will call rdev_addable which protected by rcu_read_lock/rcu_read_unlock. This rcu context will help protect rdev won't be released, but rdev->mddev will be set to NULL before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by using READ_ONCE and check does rdev->mddev still alive.

In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo).

In the Linux kernel, the following vulnerability has been resolved: media: ti: j721e-csi2rx: fix list_del corruption If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue. This causes the same buffer to be retried in the next iteration, resulting in a double list_del() and eventual list corruption. Fix this by removing the buffer from the queue before calling vb2_buffer_done() on error. This resolves a crash due to list_del corruption: [ 37.811243] j721e-csi2rx 30102000.ticsi2rx: Failed to queue the next buffer for DMA [ 37.832187] slab kmalloc-2k start ffff00000255b000 pointer offset 1064 size 2048 [ 37.839761] list_del corruption. next->prev should be ffff00000255bc28, but was ffff00000255d428. (next=ffff00000255b428) [ 37.850799] ------------[ cut here ]------------ [ 37.855424] kernel BUG at lib/list_debug.c:65! [ 37.859876] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 37.866061] Modules linked in: i2c_dev usb_f_rndis u_ether libcomposite dwc3 udc_core usb_common aes_ce_blk aes_ce_cipher ghash_ce gf128mul sha1_ce cpufreq_dt dwc3_am62 phy_gmii_sel sa2ul [ 37.882830] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.16.0-rc3+ #28 VOLUNTARY [ 37.890851] Hardware name: Bosch STLA-GSRV2-B0 (DT) [ 37.895737] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.902703] pc : __list_del_entry_valid_or_report+0xdc/0x114 [ 37.908390] lr : __list_del_entry_valid_or_report+0xdc/0x114 [ 37.914059] sp : ffff800080003db0 [ 37.917375] x29: ffff800080003db0 x28: 0000000000000007 x27: ffff800080e50000 [ 37.924521] x26: 0000000000000000 x25: ffff0000016abb50 x24: dead000000000122 [ 37.931666] x23: ffff0000016abb78 x22: ffff0000016ab080 x21: ffff800080003de0 [ 37.938810] x20: ffff00000255bc00 x19: ffff00000255b800 x18: 000000000000000a [ 37.945956] x17: 20747562202c3832 x16: 6362353532303030 x15: 0720072007200720 [ 37.953101] x14: 0720072007200720 x13: 0720072007200720 x12: 00000000ffffffea [ 37.960248] x11: ffff800080003b18 x10: 00000000ffffefff x9 : ffff800080f5b568 [ 37.967396] x8 : ffff800080f5b5c0 x7 : 0000000000017fe8 x6 : c0000000ffffefff [ 37.974542] x5 : ffff00000fea6688 x4 : 0000000000000000 x3 : 0000000000000000 [ 37.981686] x2 : 0000000000000000 x1 : ffff800080ef2b40 x0 : 000000000000006d [ 37.988832] Call trace: [ 37.991281] __list_del_entry_valid_or_report+0xdc/0x114 (P) [ 37.996959] ti_csi2rx_dma_callback+0x84/0x1c4 [ 38.001419] udma_vchan_complete+0x1e0/0x344 [ 38.005705] tasklet_action_common+0x118/0x310 [ 38.010163] tasklet_action+0x30/0x3c [ 38.013832] handle_softirqs+0x10c/0x2e0 [ 38.017761] __do_softirq+0x14/0x20 [ 38.021256] ____do_softirq+0x10/0x20 [ 38.024931] call_on_irq_stack+0x24/0x60 [ 38.028873] do_softirq_own_stack+0x1c/0x40 [ 38.033064] __irq_exit_rcu+0x130/0x15c [ 38.036909] irq_exit_rcu+0x10/0x20 [ 38.040403] el1_interrupt+0x38/0x60 [ 38.043987] el1h_64_irq_handler+0x18/0x24 [ 38.048091] el1h_64_irq+0x6c/0x70 [ 38.051501] default_idle_call+0x34/0xe0 (P) [ 38.055783] do_idle+0x1f8/0x250 [ 38.059021] cpu_startup_entry+0x34/0x3c [ 38.062951] rest_init+0xb4/0xc0 [ 38.066186] console_on_rootfs+0x0/0x6c [ 38.070031] __primary_switched+0x88/0x90 [ 38.074059] Code: b00037e0 91378000 f9400462 97e9bf49 (d4210000) [ 38.080168] ---[ end trace 0000000000000000 ]--- [ 38.084795] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 38.092197] SMP: stopping secondary CPUs [ 38.096139] Kernel Offset: disabled [ 38.099631] CPU features: 0x0000,00002000,02000801,0400420b [ 38.105202] Memory Limit: none [ 38.108260] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---

spimsimulator spim v9.1.24 and before is vulnerable to Buffer Overflow in READ_STRING_SYSCALL.

JeecgBoot versions from 3.4.3 up to 3.8.0 were found to contain a SQL injection vulnerability in the /jeecg-boot/online/cgreport/head/parseSql endpoint, which allows bypassing SQL blacklist restrictions.

In the Linux kernel, the following vulnerability has been resolved: vsock: Do not allow binding to VMADDR_PORT_ANY It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can cause a use-after-free when a connection is made to the bound socket. The socket returned by accept() also has port VMADDR_PORT_ANY but is not on the list of unbound sockets. Binding it will result in an extra refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep the binding until socket destruction). Modify the check in __vsock_bind_connectible() to also prevent binding to VMADDR_PORT_ANY.

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history.

In the Linux kernel, the following vulnerability has been resolved: tls: handle data disappearing from under the TLS ULP TLS expects that it owns the receive queue of the TCP socket. This cannot be guaranteed in case the reader of the TCP socket entered before the TLS ULP was installed, or uses some non-standard read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy early exit (which leaves anchor pointing to a freed skb) with real error handling. Wipe the parsing state and tell the reader to retry. We already reload the anchor every time we (re)acquire the socket lock, so the only condition we need to avoid is an out of bounds read (not having enough bytes in the socket for previously parsed record len). If some data was read from under TLS but there's enough in the queue we'll reload and decrypt what is most likely not a valid TLS record. Leading to some undefined behavior from TLS perspective (corrupting a stream? missing an alert? missing an attack?) but no kernel crash should take place.

In the Linux kernel, the following vulnerability has been resolved: tls: stop recv() if initial process_rx_list gave us non-DATA If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work.

WebITR developed by Uniong has an Arbitrary File Reading vulnerability, allowing remote attackers with regular privileges to exploit Absolute Path Traversal to download arbitrary system files.

WebITR developed by Uniong has an Arbitrary File Reading vulnerability, allowing remote attackers with regular privileges to exploit Absolute Path Traversal to download arbitrary system files.

WebITR developed by Uniong has an Arbitrary File Reading vulnerability, allowing remote attackers with regular privileges to exploit Absolute Path Traversal to download arbitrary system files.

WebITR developed by Uniong has an Arbitrary File Reading vulnerability, allowing remote attackers with regular privileges to exploit Absolute Path Traversal to download arbitrary system files.

WebITR developed by Uniong has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents.

WebITR developed by Uniong has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to log into the system as arbitrary users by exploiting a specific functionality.

Uncontrolled Resource Consumption vulnerability in Legion of the Bouncy Castle Inc. Bouncy Castle for Java FIPS bc-fips on All (API modules), Legion of the Bouncy Castle Inc. Bouncy Castle for Java LTS bcprov-lts8on on All (API modules) allows Excessive Allocation. This vulnerability is associated with program files org/bouncycastle/crypto/fips/AESNativeCBC.Java, org/bouncycastle/crypto/engines/AESNativeCBC.Java. This issue affects Bouncy Castle for Java FIPS: 2.1.0; Bouncy Castle for Java LTS: from 2.73.0 through 2.73.7.

The WP Talroo WordPress plugin through 2.4 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin and unauthenticated users.

Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.4, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15 and 7.4 GA through update 92 allow users to upload an unlimited amount of files through the object entries attachment fields, the files are stored in the document_library allowing an attacker to cause a potential DDoS.

A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.3.32 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.7, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.1 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.16 and 7.4 update 32 through update 92 allows an remote authenticated user to inject JavaScript into the embedded message field from the form container.

A server-side request forgery (SSRF) vulnerability exists in the Liferay DXP 2025.Q2.0 through 2025.Q2.3 due to insecure domain validation on analytics.cloud.domain.allowed, allowing an attacker to perform requests by change the domain and bypassing the validation method, this insecure validation is not distinguishing between trusted subdomains and malicious domains.

Untrusted pointer dereference in Windows MBT Transport driver allows an authorized attacker to elevate privileges locally.

Improper verification of cryptographic signature in Windows Certificates allows an unauthorized attacker to perform spoofing over a network.

Insecure permissions in Agent-Zero v0.8.* allow attackers to arbitrarily reset the system via unspecified vectors.

An issue in the component /api/download_work_dir_file.py of Agent-Zero v0.8.* allows attackers to execute a directory traversal.

Username enumeration vulnerability in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.14 and 7.4 GA through update 92 allows attackers to determine if an account exist in the application by inspecting the server processing time of the login request.

Mattermost versions 10.8.x <= 10.8.3, 10.5.x <= 10.5.8, 9.11.x <= 9.11.17, 10.10.x <= 10.10.0, 10.9.x <= 10.9.3 fail to validate import data which allows a system admin to crash the server via the bulk import feature.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in markdown-it allows Cross-Site Scripting (XSS). This vulnerability is associated with program files lib/renderer.mjs. This issue affects markdown-it: 14.1.0. NOTE: the Supplier does not consider this issue to be a vulnerability.

Mattermost versions 10.8.x <= 10.8.3, 10.5.x <= 10.5.8, 10.10.x <= 10.10.0, 10.9.x <= 10.9.3 fail to sanitize file names which allows users with file upload permission to overwrite file attachment thumbnails via path traversal in file streaming APIs.

<!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}-->A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.15, 2025.Q2.0 through 2025.Q2.2 and 2024.Q1.13 through 2024.Q1.19 allows a remote authenticated user to inject JavaScript code via snippet parameter.

A Stored cross-site scripting vulnerability in the Liferay Portal 7.4.0 t through 7.4.3.132, and Liferay DXP 2025.Q2.0, 2025.Q1.0 through 2025.Q1.13, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.17 and 7.4 GA through update 92 allows an remote authenticated attacker to inject JavaScript into the _com_liferay_layout_admin_web_portlet_GroupPagesPortlet_type parameter.

An issue was discovered in TitanHQ SpamTitan Email Security Gateway 8.00.x before 8.00.101 and 8.01.x before 8.01.14. The file quarantine.php within the SpamTitan interface allows unauthenticated users to trigger account-level actions using a crafted GET request. Notably, when a non-existent email address is provided as part of the email parameter, SpamTitan will automatically create a user record and associate quarantine settings with it - all without requiring authentication.

A security flaw has been discovered in TOTOLINK A720R 4.1.5cu.630_B20250509. This issue affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. Performing manipulation of the argument desc results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited.

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9.

SQL Injection in the listdomains function in Easy Hosting Control Panel (EHCP) 20.04.1.b allows authenticated attackers to access or manipulate database contents via the arananalan POST parameter.

vLLM is an inference and serving engine for large language models (LLMs). From 0.1.0 to before 0.10.1.1, a Denial of Service (DoS) vulnerability can be triggered by sending a single HTTP GET request with an extremely large header to an HTTP endpoint. This results in server memory exhaustion, potentially leading to a crash or unresponsiveness. The attack does not require authentication, making it exploitable by any remote user. This vulnerability is fixed in 0.10.1.1.

Plex Media Server (PMS) 1.41.7.x through 1.42.0.x before 1.42.1 is affected by incorrect resource transfer between spheres because /myplex/account provides the credentials of the server owner (and a /api/resources call reveals other servers accessible by that server owner).

Mattermost Server versions 10.5.x <= 10.5.9 utilizing the Agents plugin fail to reject empty request bodies which allows users to trick users into clicking malicious links via post actions

The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the give_update_payment_status() function in all versions up to, and including, 4.5.0. This makes it possible for authenticated attackers, with GiveWP Worker-level access and above, to update donations statuses. This ability is not present in the user interface.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS 15.8.5, iOS 16.7.12 and iPadOS 16.7.12. Processing a malicious image file may result in memory corruption. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals.

Improper Input Validation vulnerability in sha.js allows Input Data Manipulation.This issue affects sha.js: through 2.4.11.

Improper Input Validation vulnerability in cipher-base allows Input Data Manipulation.This issue affects cipher-base: through 1.0.4.

A weakness has been identified in elunez eladmin up to 2.7. This affects the function exportUser. This manipulation causes csv injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.

In Eclipse Jetty, versions <=9.4.57, <=10.0.25, <=11.0.25, <=12.0.21, <=12.1.0.alpha2, an HTTP/2 client may trigger the server to send RST_STREAM frames, for example by sending frames that are malformed or that should not be sent in a particular stream state, therefore forcing the server to consume resources such as CPU and memory. For example, a client can open a stream and then send WINDOW_UPDATE frames with window size increment of 0, which is illegal. Per specification https://www.rfc-editor.org/rfc/rfc9113.html#name-window_update , the server should send a RST_STREAM frame. The client can now open another stream and send another bad WINDOW_UPDATE, therefore causing the server to consume more resources than necessary, as this case does not exceed the max number of concurrent streams, yet the client is able to create an enormous amount of streams in a short period of time. The attack can be performed with other conditions (for example, a DATA frame for a closed stream) that cause the server to send a RST_STREAM frame. Links: * https://github.com/jetty/jetty.project/security/advisories/GHSA-mmxm-8w33-wc4h

Critical XXE in Apache Tika (tika-parser-pdf-module) in Apache Tika 1.13 through and including 3.2.1 on all platforms allows an attacker to carry out XML External Entity injection via a crafted XFA file inside of a PDF. An attacker may be able to read sensitive data or trigger malicious requests to internal resources or third-party servers. Note that the tika-parser-pdf-module is used as a dependency in several Tika packages including at least: tika-parsers-standard-modules, tika-parsers-standard-package, tika-app, tika-grpc and tika-server-standard. Users are recommended to upgrade to version 3.2.2, which fixes this issue.

Cross Site Request Forgery (CSRF) vulnerability in old-peanut Open-Shop (aka old-peanut/wechat_applet__open_source) thru 1.0.0 allows attackers to gain sensitive information via crafted HTTP Post message.

A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q2.0 through 2025.Q2.2, 2025.Q1.0 through 2025.Q1.14, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.1 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.18 and 7.4 GA through update 92 allows a remote authenticated attacker to inject JavaScript code via _com_liferay_dynamic_data_mapping_web_portlet_DDMPortlet_definition parameter.