In the Linux kernel, the following vulnerability has been resolved:
perf: Improve missing SIGTRAP checking
To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(),
which fires if pending_sigtrap was already set: returning to user space
without consuming pending_sigtrap, and then having the event fire again
would re-enter the kernel and trigger the WARN.
This, however, seemed to miss the case where some events not associated
with progress in the user space task can fire and the interrupt handler
runs before the IRQ work meant to consume pending_sigtrap (and generate
the SIGTRAP).
syzbot gifted us this stack trace:
| WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow
| Modules linked in:
| CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
| RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313
| <...>
| Call Trace:
| <TASK>
| perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729
| __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
| __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749
| hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
| local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline]
| __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113
| sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107
| asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649
| <...>
| </TASK>
In this case, syzbot produced a program with event type
PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer
manages to fire again before the IRQ work got a chance to run, all while
never having returned to user space.
Improve the WARN to check for real progress in user space: approximate
this by storing a 32-bit hash of the current IP into pending_sigtrap,
and if an event fires while pending_sigtrap still matches the previous
IP, we assume no progress (false negatives are possible given we could
return to user space and trigger again on the same IP).
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu.
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need
goto error label in this case.
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly.
In the Linux kernel, the following vulnerability has been resolved:
arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud
The page table check trigger BUG_ON() unexpectedly when collapse hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:82!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 6 PID: 68 Comm: khugepaged Not tainted 6.1.0-rc3+ #750
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_clear.isra.0+0x258/0x3f0
lr : page_table_check_clear.isra.0+0x240/0x3f0
[...]
Call trace:
page_table_check_clear.isra.0+0x258/0x3f0
__page_table_check_pmd_clear+0xbc/0x108
pmdp_collapse_flush+0xb0/0x160
collapse_huge_page+0xa08/0x1080
hpage_collapse_scan_pmd+0xf30/0x1590
khugepaged_scan_mm_slot.constprop.0+0x52c/0xac8
khugepaged+0x338/0x518
kthread+0x278/0x2f8
ret_from_fork+0x10/0x20
[...]
Since pmd_user_accessible_page() doesn't check if a pmd is leaf, it
decrease file_map_count for a non-leaf pmd comes from collapse_huge_page().
and so trigger BUG_ON() unexpectedly.
Fix this problem by using pmd_leaf() insteal of pmd_present() in
pmd_user_accessible_page(). Moreover, use pud_leaf() for
pud_user_accessible_page() too.
In the Linux kernel, the following vulnerability has been resolved:
Input: i8042 - fix leaking of platform device on module removal
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
In the Linux kernel, the following vulnerability has been resolved:
macvlan: enforce a consistent minimal mtu
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
Should not call eventfd_ctx_put() in case of error.
[Introduce new goto target instead. - Paolo]
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix optc2_configure warning on dcn314
[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]
[How]
Use optc1_configure_crc() directly
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation. That is, the check itself is valid and snd_BUG_ON()
should be dropped from there. Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it.
In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".
In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid putting the realm twice when decoding snaps fails
When decoding the snaps fails it maybe leaving the 'first_realm'
and 'realm' pointing to the same snaprealm memory. And then it'll
put it twice and could cause random use-after-free, BUG_ON, etc
issues.
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Check sb_bsize_shift after reading superblock
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb
mount /dev/vdb /mnt/test && umount /mnt/test
done
Before this patch we get a withdraw after
[ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[ 76.413681] bh = 19 (type: exp=5, found=4)
[ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492
and with UBSAN configured we also get complaints like
[ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'
After the patch, these complaints don't appear, mount fails immediately
and we get an explanation in dmesg.
In the Linux kernel, the following vulnerability has been resolved:
9p: trans_fd/p9_conn_cancel: drop client lock earlier
syzbot reported a double-lock here and we no longer need this
lock after requests have been moved off to local list:
just drop the lock earlier.
In the Linux kernel, the following vulnerability has been resolved:
9p/trans_fd: always use O_NONBLOCK read/write
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
[Dominique: add comment at Christian's suggestion]
In the Linux kernel, the following vulnerability has been resolved:
netlink: Bounds-check struct nlmsgerr creation
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)
In the Linux kernel, the following vulnerability has been resolved:
net/9p: use a dedicated spinlock for trans_fd
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent bpf program recursion for raw tracepoint probes
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
__unfreeze_partials+0x5b/0x160
...
The can be reproduced by attaching bpf program as raw tracepoint on
contention_begin tracepoint. The bpf prog calls bpf_trace_printk
helper. Then by running perf bench the spin lock code is forced to
take slow path and call contention_begin tracepoint.
Fixing this by skipping execution of the bpf program if it's
already running, Using bpf prog 'active' field, which is being
currently used by trampoline programs for the same reason.
Moving bpf_prog_inc_misses_counter to syscall.c because
trampoline.c is compiled in just for CONFIG_BPF_JIT option.
[1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix use-after-free in ntfs_attr_find()
Patch series "ntfs: fix bugs about Attribute", v2.
This patchset fixes three bugs relative to Attribute in record:
Patch 1 adds a sanity check to ensure that, attrs_offset field in first
mft record loading from disk is within bounds.
Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid
dereferencing ATTR_RECORD before checking this ATTR_RECORD is within
bounds.
Patch 3 adds an overflow checking to avoid possible forever loop in
ntfs_attr_find().
Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free
detection as reported by Syzkaller.
Although one of patch 1 or patch 2 can fix this, we still need both of
them. Because patch 1 fixes the root cause, and patch 2 not only fixes
the direct cause, but also fixes the potential out-of-bounds bug.
This patch (of 3):
Syzkaller reported use-after-free read as follows:
==================================================================
BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193
ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845
ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854
mount_bdev+0x34d/0x410 fs/super.c:1400
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350
head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140
raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Kernel will loads $MFT/$DATA's first mft record in
ntfs_read_inode_mount().
Yet the problem is that after loading, kernel doesn't check whether
attrs_offset field is a valid value.
To be more specific, if attrs_offset field is larger than bytes_allocated
field, then it may trigger the out-of-bounds read bug(reported as
use-after-free bug) in ntfs_attr_find(), when kernel tries to access the
corresponding mft record's attribute.
This patch solves it by adding the sanity check between attrs_offset field
and bytes_allocated field, after loading the first mft record.
In the Linux kernel, the following vulnerability has been resolved:
ntfs: check overflow when iterating ATTR_RECORDs
Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find().
Because the ATTR_RECORDs are next to each other, kernel can get the next
ATTR_RECORD from end address of current ATTR_RECORD, through current
ATTR_RECORD length field.
The problem is that during iteration, when kernel calculates the end
address of current ATTR_RECORD, kernel may trigger an integer overflow bug
in executing `a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))`. This
may wrap, leading to a forever iteration on 32bit systems.
This patch solves it by adding some checks on calculating end address
of current ATTR_RECORD during iteration.
In the Linux kernel, the following vulnerability has been resolved:
wifi: at76c50x: fix use after free access in at76_disconnect
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point).
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Prevent potential NULL dereference
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR'
In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll()
rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct
size of rpl is sizeof(*rpl) which should be just 1 byte. Using the
pointer size instead can cause stack corruption:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100
CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023
Workqueue: events module_flash_fw_work
Call Trace:
<TASK>
panic+0x339/0x360
? ethtool_cmis_wait_for_cond+0xf4/0x100
? __pfx_status_success+0x10/0x10
? __pfx_status_fail+0x10/0x10
__stack_chk_fail+0x10/0x10
ethtool_cmis_wait_for_cond+0xf4/0x100
ethtool_cmis_cdb_execute_cmd+0x1fc/0x330
? __pfx_status_fail+0x10/0x10
cmis_cdb_module_features_get+0x6d/0xd0
ethtool_cmis_cdb_init+0x8a/0xd0
ethtool_cmis_fw_update+0x46/0x1d0
module_flash_fw_work+0x17/0xa0
process_one_work+0x179/0x390
worker_thread+0x239/0x340
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
In the Linux kernel, the following vulnerability has been resolved:
net: mctp: Set SOCK_RCU_FREE
Bind lookup runs under RCU, so ensure that a socket doesn't go away in
the middle of a lookup.
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix nested key length validation in the set() action
It's not safe to access nla_len(ovs_key) if the data is smaller than
the netlink header. Check that the attribute is OK first.
In the Linux kernel, the following vulnerability has been resolved:
cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
Russell King reports that a system with mv88e6xxx dereferences a NULL
pointer when unbinding this driver:
https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/
The crash seems to be in devlink_region_destroy(), which is not NULL
tolerant but is given a NULL devlink global region pointer.
At least on some chips, some devlink regions are conditionally registered
since the blamed commit, see mv88e6xxx_setup_devlink_regions_global():
if (cond && !cond(chip))
continue;
These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip
does not have an STU or PVT, it should crash like this.
To fix the issue, avoid unregistering those regions which are NULL, i.e.
were skipped at mv88e6xxx_setup_devlink_regions_global() time.
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: free routing table on probe failure
If complete = true in dsa_tree_setup(), it means that we are the last
switch of the tree which is successfully probing, and we should be
setting up all switches from our probe path.
After "complete" becomes true, dsa_tree_setup_cpu_ports() or any
subsequent function may fail. If that happens, the entire tree setup is
in limbo: the first N-1 switches have successfully finished probing
(doing nothing but having allocated persistent memory in the tree's
dst->ports, and maybe dst->rtable), and switch N failed to probe, ending
the tree setup process before anything is tangible from the user's PoV.
If switch N fails to probe, its memory (ports) will be freed and removed
from dst->ports. However, the dst->rtable elements pointing to its ports,
as created by dsa_link_touch(), will remain there, and will lead to
use-after-free if dereferenced.
If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely
possible because that is where ds->ops->setup() is, we get a kasan
report like this:
==================================================================
BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568
Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42
Call trace:
__asan_report_load8_noabort+0x20/0x30
mv88e6xxx_setup_upstream_port+0x240/0x568
mv88e6xxx_setup+0xebc/0x1eb0
dsa_register_switch+0x1af4/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Allocated by task 42:
__kasan_kmalloc+0x84/0xa0
__kmalloc_cache_noprof+0x298/0x490
dsa_switch_touch_ports+0x174/0x3d8
dsa_register_switch+0x800/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Freed by task 42:
__kasan_slab_free+0x48/0x68
kfree+0x138/0x418
dsa_register_switch+0x2694/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
The simplest way to fix the bug is to delete the routing table in its
entirety. dsa_tree_setup_routing_table() has no problem in regenerating
it even if we deleted links between ports other than those of switch N,
because dsa_link_touch() first checks whether the port pair already
exists in dst->rtable, allocating if not.
The deletion of the routing table in its entirety already exists in
dsa_tree_teardown(), so refactor that into a function that can also be
called from the tree setup error path.
In my analysis of the commit to blame, it is the one which added
dsa_link elements to dst->rtable. Prior to that, each switch had its own
ds->rtable which is freed when the switch fails to probe. But the tree
is potentially persistent memory.
In the Linux kernel, the following vulnerability has been resolved:
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check
The function dpu_plane_virtual_atomic_check was dereferencing pointers
returned by drm_atomic_get_plane_state without checking for errors. This
could lead to undefined behavior if the function returns an error pointer.
This commit adds checks using IS_ERR to ensure that plane_state is
valid before dereferencing them.
Similar to commit da29abe71e16
("drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed").
Patchwork: https://patchwork.freedesktop.org/patch/643132/
In the Linux kernel, the following vulnerability has been resolved:
isofs: Prevent the use of too small fid
syzbot reported a slab-out-of-bounds Read in isofs_fh_to_parent. [1]
The handle_bytes value passed in by the reproducing program is equal to 12.
In handle_to_path(), only 12 bytes of memory are allocated for the structure
file_handle->f_handle member, which causes an out-of-bounds access when
accessing the member parent_block of the structure isofs_fid in isofs,
because accessing parent_block requires at least 16 bytes of f_handle.
Here, fh_len is used to indirectly confirm that the value of handle_bytes
is greater than 3 before accessing parent_block.
[1]
BUG: KASAN: slab-out-of-bounds in isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
Read of size 4 at addr ffff0000cc030d94 by task syz-executor215/6466
CPU: 1 UID: 0 PID: 6466 Comm: syz-executor215 Not tainted 6.14.0-rc7-syzkaller-ga2392f333575 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xe4/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x198/0x550 mm/kasan/report.c:521
kasan_report+0xd8/0x138 mm/kasan/report.c:634
__asan_report_load4_noabort+0x20/0x2c mm/kasan/report_generic.c:380
isofs_fh_to_parent+0x1b8/0x210 fs/isofs/export.c:183
exportfs_decode_fh_raw+0x2dc/0x608 fs/exportfs/expfs.c:523
do_handle_to_path+0xa0/0x198 fs/fhandle.c:257
handle_to_path fs/fhandle.c:385 [inline]
do_handle_open+0x8cc/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 6466:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x40/0x50 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xac/0xc4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4294 [inline]
__kmalloc_noprof+0x32c/0x54c mm/slub.c:4306
kmalloc_noprof include/linux/slab.h:905 [inline]
handle_to_path fs/fhandle.c:357 [inline]
do_handle_open+0x5a4/0xb8c fs/fhandle.c:403
__do_sys_open_by_handle_at fs/fhandle.c:443 [inline]
__se_sys_open_by_handle_at fs/fhandle.c:434 [inline]
__arm64_sys_open_by_handle_at+0x80/0x94 fs/fhandle.c:434
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x84/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
In the Linux kernel, the following vulnerability has been resolved:
lib/iov_iter: fix to increase non slab folio refcount
When testing EROFS file-backed mount over v9fs on qemu, I encountered a
folio UAF issue. The page sanity check reports the following call trace.
The root cause is that pages in bvec are coalesced across a folio bounary.
The refcount of all non-slab folios should be increased to ensure
p9_releas_pages can put them correctly.
BUG: Bad page state in process md5sum pfn:18300
page: refcount:0 mapcount:0 mapping:00000000d5ad8e4e index:0x60 pfn:0x18300
head: order:0 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
aops:z_erofs_aops ino:30b0f dentry name(?):"GoogleExtServicesCn.apk"
flags: 0x100000000000041(locked|head|node=0|zone=1)
raw: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0
raw: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000
head: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0
head: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000
head: 0100000000000000 0000000000000000 ffffffffffffffff 0000000000000000
head: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Call Trace:
dump_stack_lvl+0x53/0x70
bad_page+0xd4/0x220
__free_pages_ok+0x76d/0xf30
__folio_put+0x230/0x320
p9_release_pages+0x179/0x1f0
p9_virtio_zc_request+0xa2a/0x1230
p9_client_zc_rpc.constprop.0+0x247/0x700
p9_client_read_once+0x34d/0x810
p9_client_read+0xf3/0x150
v9fs_issue_read+0x111/0x360
netfs_unbuffered_read_iter_locked+0x927/0x1390
netfs_unbuffered_read_iter+0xa2/0xe0
vfs_iocb_iter_read+0x2c7/0x460
erofs_fileio_rq_submit+0x46b/0x5b0
z_erofs_runqueue+0x1203/0x21e0
z_erofs_readahead+0x579/0x8b0
read_pages+0x19f/0xa70
page_cache_ra_order+0x4ad/0xb80
filemap_readahead.isra.0+0xe7/0x150
filemap_get_pages+0x7aa/0x1890
filemap_read+0x320/0xc80
vfs_read+0x6c6/0xa30
ksys_read+0xf9/0x1c0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x71/0x79
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix dangling pointer in krb_authenticate
krb_authenticate frees sess->user and does not set the pointer
to NULL. It calls ksmbd_krb5_authenticate to reinitialise
sess->user but that function may return without doing so. If
that happens then smb2_sess_setup, which calls krb_authenticate,
will be accessing free'd memory when it later uses sess->user.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __smb2_lease_break_noti()
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb_break_all_levII_oplock()
There is a room in smb_break_all_levII_oplock that can cause racy issues
when unlocking in the middle of the loop. This patch use read lock
to protect whole loop.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix the warning from __kernel_write_iter
[ 2110.972290] ------------[ cut here ]------------
[ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280
This patch doesn't allow writing to directory.
In the Linux kernel, the following vulnerability has been resolved:
virtiofs: add filesystem context source name check
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
struct rdma_cm_id has member "struct work_struct net_work"
that is reused for enqueuing cma_netevent_work_handler()s
onto cma_wq.
Below crash[1] can occur if more than one call to
cma_netevent_callback() occurs in quick succession,
which further enqueues cma_netevent_work_handler()s for the
same rdma_cm_id, overwriting any previously queued work-item(s)
that was just scheduled to run i.e. there is no guarantee
the queued work item may run between two successive calls
to cma_netevent_callback() and the 2nd INIT_WORK would overwrite
the 1st work item (for the same rdma_cm_id), despite grabbing
id_table_lock during enqueue.
Also drgn analysis [2] indicates the work item was likely overwritten.
Fix this by moving the INIT_WORK() to __rdma_create_id(),
so that it doesn't race with any existing queue_work() or
its worker thread.
[1] Trimmed crash stack:
=============================================
BUG: kernel NULL pointer dereference, address: 0000000000000008
kworker/u256:6 ... 6.12.0-0...
Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm)
RIP: 0010:process_one_work+0xba/0x31a
Call Trace:
worker_thread+0x266/0x3a0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
=============================================
[2] drgn crash analysis:
>>> trace = prog.crashed_thread().stack_trace()
>>> trace
(0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15)
(1) __crash_kexec (kernel/crash_core.c:122:4)
(2) panic (kernel/panic.c:399:3)
(3) oops_end (arch/x86/kernel/dumpstack.c:382:3)
...
(8) process_one_work (kernel/workqueue.c:3168:2)
(9) process_scheduled_works (kernel/workqueue.c:3310:3)
(10) worker_thread (kernel/workqueue.c:3391:4)
(11) kthread (kernel/kthread.c:389:9)
Line workqueue.c:3168 for this kernel version is in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
>>> trace[8]["work"]
*(struct work_struct *)0xffff92577d0a21d8 = {
.data = (atomic_long_t){
.counter = (s64)536870912, <=== Note
},
.entry = (struct list_head){
.next = (struct list_head *)0xffff924d075924c0,
.prev = (struct list_head *)0xffff924d075924c0,
},
.func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280,
}
Suspicion is that pwq is NULL:
>>> trace[8]["pwq"]
(struct pool_workqueue *)<absent>
In process_one_work(), pwq is assigned from:
struct pool_workqueue *pwq = get_work_pwq(work);
and get_work_pwq() is:
static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
if (data & WORK_STRUCT_PWQ)
return work_struct_pwq(data);
else
return NULL;
}
WORK_STRUCT_PWQ is 0x4:
>>> print(repr(prog['WORK_STRUCT_PWQ']))
Object(prog, 'enum work_flags', value=4)
But work->data is 536870912 which is 0x20000000.
So, get_work_pwq() returns NULL and we crash in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
=============================================
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/smu11: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71)
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.