CVE Database

In the Linux kernel, the following vulnerability has been resolved: perf/core: Add RCU read lock protection to perf_iterate_ctx() The perf_iterate_ctx() function performs RCU list traversal but currently lacks RCU read lock protection. This causes lockdep warnings when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y: WARNING: suspicious RCU usage kernel/events/core.c:8168 RCU-list traversed in non-reader section!! Call Trace: lockdep_rcu_suspicious ? perf_event_addr_filters_apply perf_iterate_ctx perf_event_exec begin_new_exec ? load_elf_phdrs load_elf_binary ? lock_acquire ? find_held_lock ? bprm_execve bprm_execve do_execveat_common.isra.0 __x64_sys_execve do_syscall_64 entry_SYSCALL_64_after_hwframe This protection was previously present but was removed in commit bd2756811766 ("perf: Rewrite core context handling"). Add back the necessary rcu_read_lock()/rcu_read_unlock() pair around perf_iterate_ctx() call in perf_event_exec(). [ mingo: Use scoped_guard() as suggested by Peter ]

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up The issue was caused by dput(upper) being called before ovl_dentry_update_reval(), while upper->d_flags was still accessed in ovl_dentry_remote(). Move dput(upper) after its last use to prevent use-after-free. BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline] BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 ovl_dentry_remote fs/overlayfs/util.c:162 [inline] ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 ovl_link_up fs/overlayfs/copy_up.c:610 [inline] ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170 ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223 ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136 vfs_rename+0xf84/0x20a0 fs/namei.c:4893 ... </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix implicit ODP hang on parent deregistration Fix the destroy_unused_implicit_child_mr() to prevent hanging during parent deregistration as of below [1]. Upon entering destroy_unused_implicit_child_mr(), the reference count for the implicit MR parent is incremented using: refcount_inc_not_zero(). A corresponding decrement must be performed if free_implicit_child_mr_work() is not called. The code has been updated to properly manage the reference count that was incremented. [1] INFO: task python3:2157 blocked for more than 120 seconds. Not tainted 6.12.0-rc7+ #1633 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:python3 state:D stack:0 pid:2157 tgid:2157 ppid:1685 flags:0x00000000 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 __mlx5_ib_dereg_mr+0x379/0x5d0 [mlx5_ib] ? __pfx_autoremove_wake_function+0x10/0x10 ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 ? kmem_cache_free+0x221/0x400 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f20f21f017b RSP: 002b:00007ffcfc4a77c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffcfc4a78d8 RCX: 00007f20f21f017b RDX: 00007ffcfc4a78c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffcfc4a78a0 R08: 000056147d125190 R09: 00007f20f1f14c60 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffcfc4a7890 R13: 000000000000001c R14: 000056147d100fc0 R15: 00007f20e365c9d0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also.

In the Linux kernel, the following vulnerability has been resolved: net: better track kernel sockets lifetime While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: ice: Fix deinitializing VF in error path If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself).

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix vport QoS cleanup on error When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL.

In the Linux kernel, the following vulnerability has been resolved: uprobes: Reject the shared zeropage in uprobe_write_opcode() We triggered the following crash in syzkaller tests: BUG: Bad page state in process syz.7.38 pfn:1eff3 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3 flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff) raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_unref_page_prepare+0x401/0x500 free_unref_page+0x6d/0x1b0 uprobe_write_opcode+0x460/0x8e0 install_breakpoint.part.0+0x51/0x80 register_for_each_vma+0x1d9/0x2b0 __uprobe_register+0x245/0x300 bpf_uprobe_multi_link_attach+0x29b/0x4f0 link_create+0x1e2/0x280 __sys_bpf+0x75f/0xac0 __x64_sys_bpf+0x1a/0x30 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1 The following syzkaller test case can be used to reproduce: r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8) write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10) r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0) mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0) r5 = userfaultfd(0x80801) ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20}) r6 = userfaultfd(0x80801) ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140)) ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2}) ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}}) r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94) bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40) The cause is that zero pfn is set to the PTE without increasing the RSS count in mfill_atomic_pte_zeropage() and the refcount of zero folio does not increase accordingly. Then, the operation on the same pfn is performed in uprobe_write_opcode()->__replace_page() to unconditional decrease the RSS count and old_folio's refcount. Therefore, two bugs are introduced: 1. The RSS count is incorrect, when process exit, the check_mm() report error "Bad rss-count". 2. The reserved folio (zero folio) is freed when folio->refcount is zero, then free_pages_prepare->free_page_is_bad() report error "Bad page state". There is more, the following warning could also theoretically be triggered: __replace_page() -> ... -> folio_remove_rmap_pte() -> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio) Considering that uprobe hit on the zero folio is a very rare case, just reject zero old folio immediately after get_user_page_vma_remote(). [ mingo: Cleaned up the changelog ]

In the Linux kernel, the following vulnerability has been resolved: drm/xe/userptr: fix EFAULT handling Currently we treat EFAULT from hmm_range_fault() as a non-fatal error when called from xe_vm_userptr_pin() with the idea that we want to avoid killing the entire vm and chucking an error, under the assumption that the user just did an unmap or something, and has no intention of actually touching that memory from the GPU. At this point we have already zapped the PTEs so any access should generate a page fault, and if the pin fails there also it will then become fatal. However it looks like it's possible for the userptr vma to still be on the rebind list in preempt_rebind_work_func(), if we had to retry the pin again due to something happening in the caller before we did the rebind step, but in the meantime needing to re-validate the userptr and this time hitting the EFAULT. This explains an internal user report of hitting: [ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe] [ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738690] Call Trace: [ 191.738692] <TASK> [ 191.738694] ? show_regs+0x69/0x80 [ 191.738698] ? __warn+0x93/0x1a0 [ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738759] ? report_bug+0x18f/0x1a0 [ 191.738764] ? handle_bug+0x63/0xa0 [ 191.738767] ? exc_invalid_op+0x19/0x70 [ 191.738770] ? asm_exc_invalid_op+0x1b/0x20 [ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738834] ? ret_from_fork_asm+0x1a/0x30 [ 191.738849] bind_op_prepare+0x105/0x7b0 [xe] [ 191.738906] ? dma_resv_reserve_fences+0x301/0x380 [ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe] [ 191.738966] ? kmemleak_alloc+0x4b/0x80 [ 191.738973] ops_execute+0x188/0x9d0 [xe] [ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe] [ 191.739098] ? trace_hardirqs_on+0x4d/0x60 [ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe] Followed by NPD, when running some workload, since the sg was never actually populated but the vma is still marked for rebind when it should be skipped for this special EFAULT case. This is confirmed to fix the user report. v2 (MattB): - Move earlier. v3 (MattB): - Update the commit message to make it clear that this indeed fixes the issue. (cherry picked from commit 6b93cb98910c826c2e2004942f8b060311e43618)

In the Linux kernel, the following vulnerability has been resolved: i2c: npcm: disable interrupt enable bit before devm_request_irq The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds..

In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix suspicious RCU usage Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts locally") moved the call to enable_drhd_fault_handling() to a code path that does not hold any lock while traversing the drhd list. Fix it by ensuring the dmar_global_lock lock is held when traversing the drhd list. Without this fix, the following warning is triggered: ============================= WARNING: suspicious RCU usage 6.14.0-rc3 #55 Not tainted ----------------------------- drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by cpuhp/1/23: #0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 #1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 stack backtrace: CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55 Call Trace: <TASK> dump_stack_lvl+0xb7/0xd0 lockdep_rcu_suspicious+0x159/0x1f0 ? __pfx_enable_drhd_fault_handling+0x10/0x10 enable_drhd_fault_handling+0x151/0x180 cpuhp_invoke_callback+0x1df/0x990 cpuhp_thread_fun+0x1ea/0x2c0 smpboot_thread_fn+0x1f5/0x2e0 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x12a/0x2d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4a/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat about a possible deadlock between dmar_global_lock and cpu_hotplug_lock. This is avoided by not holding dmar_global_lock when calling iommu_device_register(), which initiates the device probe process.

In the Linux kernel, the following vulnerability has been resolved: mptcp: always handle address removal under msk socket lock Syzkaller reported a lockdep splat in the PM control path: WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Modules linked in: CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline] RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline] RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283 RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408 RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000 R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0 R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00 FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59 mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486 mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline] mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:733 ____sys_sendmsg+0x53a/0x860 net/socket.c:2573 ___sys_sendmsg net/socket.c:2627 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7e9998cde9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9 RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007 RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088 Indeed the PM can try to send a RM_ADDR over a msk without acquiring first the msk socket lock. The bugged code-path comes from an early optimization: when there are no subflows, the PM should (usually) not send RM_ADDR notifications. The above statement is incorrect, as without locks another process could concur ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: Avoid divide by zero in table status in Inline mode In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ...

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: bsg: Fix crash when arpmb command fails If the device doesn't support arpmb we'll crash due to copying user data in bsg_transport_sg_io_fn(). In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not set the job's reply_len. Memory crash backtrace: 3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22 4,1308,531166555,-;Call Trace: 4,1309,531166559,-; <TASK> 4,1310,531166565,-; ? show_regs+0x6d/0x80 4,1311,531166575,-; ? die+0x37/0xa0 4,1312,531166583,-; ? do_trap+0xd4/0xf0 4,1313,531166593,-; ? do_error_trap+0x71/0xb0 4,1314,531166601,-; ? usercopy_abort+0x6c/0x80 4,1315,531166610,-; ? exc_invalid_op+0x52/0x80 4,1316,531166622,-; ? usercopy_abort+0x6c/0x80 4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20 4,1318,531166643,-; ? usercopy_abort+0x6c/0x80 4,1319,531166652,-; __check_heap_object+0xe3/0x120 4,1320,531166661,-; check_heap_object+0x185/0x1d0 4,1321,531166670,-; __check_object_size.part.0+0x72/0x150 4,1322,531166679,-; __check_object_size+0x23/0x30 4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0

In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place.

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched().

Following the recent Chrome sandbox escape (CVE-2025-2783), various Firefox developers identified a similar pattern in our IPC code. A compromised child process could cause the parent process to return an unintentionally powerful handle, leading to a sandbox escape. The original vulnerability was being exploited in the wild. *This only affects Firefox on Windows. Other operating systems are unaffected.* This vulnerability affects Firefox < 136.0.4, Firefox ESR < 128.8.1, and Firefox ESR < 115.21.1.

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix supplicant wait loop OP-TEE supplicant is a user-space daemon and it's possible for it be hung or crashed or killed in the middle of processing an OP-TEE RPC call. It becomes more complicated when there is incorrect shutdown ordering of the supplicant process vs the OP-TEE client application which can eventually lead to system hang-up waiting for the closure of the client application. Allow the client process waiting in kernel for supplicant response to be killed rather than indefinitely waiting in an unkillable state. Also, a normal uninterruptible wait should not have resulted in the hung-task watchdog getting triggered, but the endless loop would. This fixes issues observed during system reboot/shutdown when supplicant got hung for some reason or gets crashed/killed which lead to client getting hung in an unkillable state. It in turn lead to system being in hung up state requiring hard power off/on to recover.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Disable KASAN report during patching via temporary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc97b42 ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: allow small head cache usage with large MAX_SKB_FRAGS values Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache.

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The cause of the issue was that eth_skb_pkt_type() accessed skb's data that didn't contain an Ethernet header. This occurs when bpf_prog_test_run_xdp() passes an invalid value as the user_data argument to bpf_test_init(). Fix this by returning an error when user_data is less than ETH_HLEN in bpf_test_init(). Additionally, remove the check for "if (user_size > size)" as it is unnecessary. [1] BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [inline] __se_sys_bpf kernel/bpf/syscall.c:5864 [inline] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: free_pages_prepare mm/page_alloc.c:1056 [inline] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [inline] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 worker_thread+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpeverest User Registration allows Stored XSS. This issue affects User Registration: from n/a through 4.0.3.

Missing Authorization vulnerability in ThemeHunk Big Store allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Big Store: from n/a through 2.0.8.

KNIME Business Hub is affected by the Ingress-nginx CVE-2025-1974 ( a.k.a IngressNightmare ) vulnerability which affects the ingress-nginx component. In the worst case a complete takeover of the Kubernetes cluster is possible. Since the affected component is only reachable from within the cluster, i.e. requires an authenticated user, the severity in the context of KNIME Business Hub is slightly lower. Besides applying the publicly known workarounds, we strongly recommend updating to one of the following versions of KNIME Business Hub: * 1.13.3 or above * 1.12.4 or above * 1.11.4 or above * 1.10.4 or above *

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of HEAD requests. Some tools use Directus to sync content and assets, and some of those tools use the HEAD method to check the existence of files. When making many HEAD requests at once, at some point, all assets are eventually served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of malformed transformations. When making many malformed transformation requests at once, at some point, all assets are served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

Incorrect handle provided in unspecified circumstances in Mojo in Google Chrome on Windows prior to 134.0.6998.177 allowed a remote attacker to perform a sandbox escape via a malicious file. (Chromium security severity: High)

Fast CAD Reader application on MacOS was found to be installed with incorrect file permissions (rwxrwxrwx). This is inconsistent with standard macOS security practices, where applications should have drwxr-xr-x permissions. Incorrect permissions allow for Dylib Hijacking. Guest account, other users and applications can exploit this vulnerability for privilege escalation. This issue affects Fast CAD Reader in possibly all versions since the vendor has not responded to our messages. The tested version was 4.1.5

Discourse is an open-source discussion platform. Prior to versions `3.3.4` on the `stable` branch and `3.4.0.beta5` on the `beta` branch, someone who is about to reach the limit of users in a group DM may send requests to add new users in parallel. The requests might all go through ignoring the limit due to a race condition. The patch in versions `3.3.4` and `3.4.0.beta5` uses the `lock` step in service to wrap part of the `add_users_to_channel` service inside a distributed lock/mutex in order to avoid the race condition.

Icinga Director is an Icinga config deployment tool. A Security vulnerability has been found starting in version 1.0.0 and prior to 1.10.4 and 1.11.4 on several director endpoints of REST API. To reproduce this vulnerability an authenticated user with permission to access the Director is required (plus api access with regard to the api endpoints). And even though some of these Icinga Director users are restricted from accessing certain objects, are able to retrieve information related to them if their name is known. This makes it possible to change the configuration of these objects by those Icinga Director users restricted from accessing them. This results in further exploitation, data breaches and sensitive information disclosure. Affected endpoints include icingaweb2/director/service, if the host name is left out of the query; icingaweb2/directore/notification; icingaweb2/director/serviceset; and icingaweb2/director/scheduled-downtime. In addition, the endpoint `icingaweb2/director/services?host=filteredHostName` returns a status code 200 even though the services for the host is filtered. This in turn lets the restricted user know that the host `filteredHostName` exists even though the user is restricted from accessing it. This could again result in further exploitation of this information and data breaches. Icinga Director has patches in versions 1.10.4 and 1.11.4. If upgrading is not feasible, disable the director module for the users other than admin role for the time being.

The Product Import Export for WooCommerce – Import Export Product CSV Suite plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 2.5.0 via deserialization of untrusted input from the 'form_data' parameter This makes it possible for authenticated attackers, with Administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

Improper permission control vulnerability in the OXARI ServiceDesk application could allow an attacker using a guest access or an unprivileged account to gain additional administrative permissions in the application.This issue affects OXARI ServiceDesk in versions before 2.0.324.0.

HCL SX does not set the secure attribute on authorization tokens or session cookies. Attackers may potentially be able to obtain access to the cookie values via a Cross-Site-Forgery-Request (CSRF).

Huawei PCs have a vulnerability that allows low-privilege users to bypass SDDL permission checks . Successful exploitation this vulnerability could lead to termination of some system processes.

An issue was discovered in Artifex Ghostscript before 10.05.0. The BJ10V device has a Print buffer overflow in contrib/japanese/gdev10v.c.

An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs when converting glyphs to Unicode in psi/zbfont.c.

An issue was discovered in Artifex Ghostscript before 10.05.0. The NPDL device has a Compression buffer overflow for contrib/japanese/gdevnpdl.c.

An issue was discovered in Artifex Ghostscript before 10.05.0. The DOCXWRITE TXTWRITE device has a text buffer overflow via long characters to devices/vector/doc_common.c.

An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs during serialization of DollarBlend in a font, for base/write_t1.c and psi/zfapi.c.

Appsmith is a platform to build admin panels, internal tools, and dashboards. Users invited as "App Viewer" should not have access to development information of a workspace. Datasources are such a component in a workspace. Yet, in versions of Appsmith prior to 1.51, app viewers are able to get a list of datasources in a workspace they're a member of. This information disclosure does NOT expose sensitive data in the datasources, such as database passwords and API Keys. The attacker needs to have been invited to a workspace as a "viewer", by someone in that workspace with access to invite. The attacker then needs to be able to signup/login to that Appsmith instance. The issue is patched in version 1.51. No known workarounds are available.

In JetBrains GoLand before 2025.1 an XXE during debugging was possible

A Host Header Injection vulnerability in TRMTracker application may allow an attacker by modifying the host header value in an HTTP request to leverage multiple attack vectors, including defacing the site content through web-cache poisoning.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, in some cases of failed memory allocation or hardware errors, uses uninitialized stack memory to compose the TLS Finished message, potentially leading to authentication bypasses such as replays.

The does not sanitise and escape some parameters when outputting them back in a page, allowing unauthenticated users the ability to perform stored Cross-Site Scripting attacks.

To exploit the vulnerability, it is necessary:

A security issue was discovered in ingress-nginx https://github.com/kubernetes/ingress-nginx where the `auth-url` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.)