CVE Database

In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error. [ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4 [ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c

In the Linux kernel, the following vulnerability has been resolved: net: fec: don't save PTP state if PTP is unsupported Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported.

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs

In the Linux kernel, the following vulnerability has been resolved: sfc: Don't invoke xdp_do_flush() from netpoll. Yury reported a crash in the sfc driver originated from netpoll_send_udp(). The netconsole sends a message and then netpoll invokes the driver's NAPI function with a budget of zero. It is dedicated to allow driver to free TX resources, that it may have used while sending the packet. In the netpoll case the driver invokes xdp_do_flush() unconditionally, leading to crash because bpf_net_context was never assigned. Invoke xdp_do_flush() only if budget is not zero.

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int340x: processor: Fix warning during module unload The processor_thermal driver uses pcim_device_enable() to enable a PCI device, which means the device will be automatically disabled on driver detach. Thus there is no need to call pci_disable_device() again on it. With recent PCI device resource management improvements, e.g. commit f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is exposed and triggers the warining below. [ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device [ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100 ... [ 224.010844] Call Trace: [ 224.010845] <TASK> [ 224.010847] ? show_regs+0x6d/0x80 [ 224.010851] ? __warn+0x8c/0x140 [ 224.010854] ? pci_disable_device+0xe5/0x100 [ 224.010856] ? report_bug+0x1c9/0x1e0 [ 224.010859] ? handle_bug+0x46/0x80 [ 224.010862] ? exc_invalid_op+0x1d/0x80 [ 224.010863] ? asm_exc_invalid_op+0x1f/0x30 [ 224.010867] ? pci_disable_device+0xe5/0x100 [ 224.010869] ? pci_disable_device+0xe5/0x100 [ 224.010871] ? kfree+0x21a/0x2b0 [ 224.010873] pcim_disable_device+0x20/0x30 [ 224.010875] devm_action_release+0x16/0x20 [ 224.010878] release_nodes+0x47/0xc0 [ 224.010880] devres_release_all+0x9f/0xe0 [ 224.010883] device_unbind_cleanup+0x12/0x80 [ 224.010885] device_release_driver_internal+0x1ca/0x210 [ 224.010887] driver_detach+0x4e/0xa0 [ 224.010889] bus_remove_driver+0x6f/0xf0 [ 224.010890] driver_unregister+0x35/0x60 [ 224.010892] pci_unregister_driver+0x44/0x90 [ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci] ... [ 224.010921] ---[ end trace 0000000000000000 ]--- Remove the excess pci_disable_device() calls. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative.

In the Linux kernel, the following vulnerability has been resolved: dm vdo: don't refer to dedupe_context after releasing it Clear the dedupe_context pointer in a data_vio whenever ownership of the context is lost, so that vdo can't examine it accidentally.

A vulnerability has been found in 1000 Projects Bookstore Management System 1.0 and classified as critical. This vulnerability affects unknown code of the file book_detail.php. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in 1000 Projects Bookstore Management System 1.0. This affects an unknown part of the file search.php. The manipulation of the argument s leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Meshtastic firmware is a device firmware for the Meshtastic project. The Meshtastic firmware does not check for packets claiming to be from the special broadcast address (0xFFFFFFFF) which could result in unexpected behavior and potential for DDoS attacks on the network. A malicious actor could craft a packet to be from that address which would result in an amplification of this one message into every node on the network sending multiple messages. Such an attack could result in degraded network performance for all users as the available bandwidth is consumed. This issue has been addressed in release version 2.5.6. All users are advised to upgrade. There are no known workarounds for this vulnerability.

An issue in Open Networking Foundations sdran-in-a-box v.1.4.3 and onos-a1t v.0.2.3 allows a remote attacker to cause a denial of service via the onos-a1t component of the sdran-in-a-box, specifically the DeleteWatcher function.

Unrestricted Upload of File with Dangerous Type vulnerability in mahlamusa Multi Purpose Mail Form allows Upload a Web Shell to a Web Server.This issue affects Multi Purpose Mail Form: from n/a through 1.0.2.

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation.This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

A vulnerability classified as critical has been found in code-projects Simple Car Rental System 1.0. Affected is an unknown function of the file /signup.php. The manipulation of the argument fname leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Broken Access Control vulnerability in Automattic Newspack allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Newspack: from n/a through 3.8.6.

Missing Authorization vulnerability in JS Help Desk JS Help Desk – Best Help Desk & Support Plugin allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects JS Help Desk – Best Help Desk & Support Plugin: from n/a through 2.8.6.

Missing Authorization vulnerability in WPWeb Elite WooCommerce PDF Vouchers allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects WooCommerce PDF Vouchers: from n/a through 4.9.4.

Missing Authorization vulnerability in Rara Themes Business One Page allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Business One Page: from n/a through 1.2.9.

Missing Authorization vulnerability in Andy Moyle Church Admin allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Church Admin: from n/a through 4.4.4.

Missing Authorization vulnerability in E2Pdf.Com allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects e2pdf: from n/a through 1.20.27.

A vulnerability was found in code-projects Blood Bank Management System 1.0. It has been classified as problematic. This affects an unknown part of the file /file/request.php. The manipulation leads to cross-site request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

When using Arm Cortex-M Security Extensions (CMSE), Secure stack contents can be leaked to Non-secure state via floating-point registers when a Secure to Non-secure function call is made that returns a floating-point value and when this is the first use of floating-point since entering Secure state. This allows an attacker to read a limited quantity of Secure stack contents with an impact on confidentiality. This issue is specific to code generated using LLVM-based compilers.

Vault Community and Vault Enterprise (“Vault”) clusters using Vault’s Integrated Storage backend are vulnerable to a denial-of-service (DoS) attack through memory exhaustion through a Raft cluster join API endpoint . An attacker may send a large volume of requests to the endpoint which may cause Vault to consume excessive system memory resources, potentially leading to a crash of the underlying system and the Vault process itself. This vulnerability, CVE-2024-8185, is fixed in Vault Community 1.18.1 and Vault Enterprise 1.18.1, 1.17.8, and 1.16.12.

DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2.

HCL AppScan Source <= 10.6.0 does not properly validate a TLS/SSL certificate for an executable.

A vulnerability was found in SourceCodester Airport Booking Management System 1.0 and classified as critical. Affected by this issue is the function Details. The manipulation of the argument passport/name leads to buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

A vulnerability has been found in code-projects Blood Bank Management System 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /file/updateprofile.php. The manipulation leads to cross-site request forgery. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Client / Server PCs with the HP Smart Universal Printing Driver installed are potentially vulnerable to Remote Code Execution and/or Elevation of Privilege. A client using the HP Smart Universal Printing Driver that sends a print job comprised of a malicious XPS file could potentially lead to Remote Code Execution and/or Elevation of Privilege on the PC.

Proactive Risk Manager version 9.1.1.0 is affected by multiple Cross-Site Scripting (XSS) vulnerabilities in the add/edit form fields, at the urls starting with the subpaths: /ar/config/configuation/ and /ar/config/risk-strategy-control/

EnGenius EWS356-Fit devices through 1.1.30 allow a remote attacker to conduct stored XSS attacks via the Wi-Fi SSID parameters. JavaScript embedded into a vulnerable field is executed when the user clicks the SSID field's corresponding EDIT button.

A security flaw involving hard-coded credentials in LevelOne WBR-6012's web services allows attackers to gain unauthorized access during the first 30 seconds post-boot. Other vulnerabilities can force a reboot, circumventing the initial time restriction for exploitation.The password string can be found at addresses 0x 803cdd0f and 0x803da3e6: 803cdd0f 41 72 69 65 ds "AriesSerenaCairryNativitaMegan" 73 53 65 72 65 6e 61 43 ... It is referenced by the function at 0x800b78b0 and simplified in the pseudocode below: if (is_equal = strcmp(password,"AriesSerenaCairryNativitaMegan"){ ret = 3;} Where 3 is the return value to user-level access (0 being fail and 1 being admin/backdoor). While there's no legitimate functionality to change this password, once authenticated it is possible manually make a change by taking advantage of TALOS-2024-XXXXX using HTTP POST paramater "Pu" (new user password) in place of "Pa" (new admin password).

A security flaw involving hard-coded credentials in LevelOne WBR-6012's web services allows attackers to gain unauthorized access during the first 30 seconds post-boot. Other vulnerabilities can force a reboot, circumventing the initial time restriction for exploitation.The backdoor string can be found at address 0x80100910 80100910 40 6d 21 74 ds "@m!t2K1" 32 4b 31 00 It is referenced by the function located at 0x800b78b0 and is used as shown in the pseudocode below: if ((SECOND_FROM_BOOT_TIME < 300) && (is_equal = strcmp(password,"@m!t2K1")) { return 1;} Where 1 is the return value to admin-level access (0 being fail and 3 being user).

In Eclipse Mosquito, versions from 2.0.0 through 2.0.18, if a Mosquitto broker is configured to create an outgoing bridge connection, and that bridge connection has an incoming topic configured that makes use of topic remapping, then if the remote connection sends a crafted PUBLISH packet to the broker a double free will occur with a subsequent crash of the broker.

In Eclipse Mosquitto, from version 1.3.2 through 2.0.18, if a malicious broker sends a crafted SUBACK packet with no reason codes, a client using libmosquitto may make out of bounds memory access when acting in its on_subscribe callback. This affects the mosquitto_sub and mosquitto_rr clients.

A vulnerability classified as critical has been found in code-projects Blood Bank System 1.0. This affects an unknown part of the file /admin/blood/update/B-.php. The manipulation of the argument Bloodname leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

upgrademysqlstatus in databases/views.py in CyberPanel (aka Cyber Panel) before 5b08cd6 allows remote attackers to bypass authentication and execute arbitrary commands via /dataBases/upgrademysqlstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

getresetstatus in dns/views.py and ftp/views.py in CyberPanel (aka Cyber Panel) before 1c0c6cb allows remote attackers to bypass authentication and execute arbitrary commands via /dns/getresetstatus or /ftp/getresetstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

A vulnerability has been identified in the Express response.links function, allowing for arbitrary resource injection in the Link header when unsanitized data is used. The issue arises from improper sanitization in `Link` header values, which can allow a combination of characters like `,`, `;`, and `<>` to preload malicious resources. This vulnerability is especially relevant for dynamic parameters.

An improper access control vulnerability in lunary-ai/lunary version 1.3.2 allows an attacker to update the SAML configuration without authorization. This vulnerability can lead to manipulation of authentication processes, fraudulent login requests, and theft of user information. Appropriate access controls should be implemented to ensure that the SAML configuration can only be updated by authorized users.

lunary-ai/lunary v1.2.26 contains an email injection vulnerability in the Send email verification API (/v1/users/send-verification) and Sign up API (/auth/signup). An unauthenticated attacker can inject data into outgoing emails by bypassing the extractFirstName function using a different whitespace character (e.g., \xa0). This vulnerability can be exploited to conduct phishing attacks, damage the application's brand, cause legal and compliance issues, and result in financial impact due to unauthorized email usage.

mudler/localai version 2.17.1 is vulnerable to a Timing Attack. This type of side-channel attack allows an attacker to compromise the cryptosystem by analyzing the time taken to execute cryptographic algorithms. Specifically, in the context of password handling, an attacker can determine valid login credentials based on the server's response time, potentially leading to unauthorized access.

mudler/LocalAI version 2.17.1 allows for arbitrary file write due to improper handling of automatic archive extraction. When model configurations specify additional files as archives (e.g., .tar), these archives are automatically extracted after downloading. This behavior can be exploited to perform a 'tarslip' attack, allowing files to be written to arbitrary locations on the server, bypassing checks that normally restrict files to the models directory. This vulnerability can lead to remote code execution (RCE) by overwriting backend assets used by the server.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in AmaderCode Lab ACL Floating Cart for WooCommerce allows Reflected XSS.This issue affects ACL Floating Cart for WooCommerce: from n/a through 0.9.

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

Memory safety bugs present in Firefox 131, Firefox ESR 128.3, and Thunderbird 128.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

By sending a specially crafted push message, a remote server could have hung the parent process, causing the browser to become unresponsive. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

A clipboard "paste" button could persist across tabs which allowed a spoofing attack. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.

Repeated writes to history interface attributes could have been used to cause a Denial of Service condition in the browser. This was addressed by introducing rate-limiting to this API. This vulnerability affects Firefox < 132, Firefox ESR < 128.4, Thunderbird < 128.4, and Thunderbird < 132.