In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:
CPU0 CPU1
| check_link_status_work
switchtec_ntb_remove |
kfree(sndev); |
| if (sndev->link_force_down)
| // use sndev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.
In the Linux kernel, the following vulnerability has been resolved:
serial: protect uart_port_dtr_rts() in uart_shutdown() too
Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do not see lots of these reports.
Or it cannot be NULL at this point at all for some reason :P.
Until the above is investigated, stay on the safe side and move this
dereference to the if too.
I got this inconsistency from Coverity under CID 1585130. Thanks.
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c
Fix potential dereferencing of ERR_PTR() in find_format_by_pix()
and uvc_v4l2_enum_format().
Fix the following smatch errors:
drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix()
error: 'fmtdesc' dereferencing possible ERR_PTR()
drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format()
error: 'fmtdesc' dereferencing possible ERR_PTR()
Also, fix similar issue in uvc_v4l2_try_format() for potential
dereferencing of ERR_PTR().
In the Linux kernel, the following vulnerability has been resolved:
driver core: bus: Fix double free in driver API bus_register()
For bus_register(), any error which happens after kset_register() will
cause that @priv are freed twice, fixed by setting @priv with NULL after
the first free.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointer before dereferencing se
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity.
In the Linux kernel, the following vulnerability has been resolved:
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
syzbot has found a NULL pointer dereference bug in fbcon.
Here is the simplified C reproducer:
struct param {
uint8_t type;
struct tiocl_selection ts;
};
int main()
{
struct fb_con2fbmap con2fb;
struct param param;
int fd = open("/dev/fb1", 0, 0);
con2fb.console = 0x19;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
param.type = 2;
param.ts.xs = 0; param.ts.ys = 0;
param.ts.xe = 0; param.ts.ye = 0;
param.ts.sel_mode = 0;
int fd1 = open("/dev/tty1", O_RDWR, 0);
ioctl(fd1, TIOCLINUX, ¶m);
con2fb.console = 1;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
return 0;
}
After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb)
causes the kernel to follow a different execution path:
set_con2fb_map
-> con2fb_init_display
-> fbcon_set_disp
-> redraw_screen
-> hide_cursor
-> clear_selection
-> highlight
-> invert_screen
-> do_update_region
-> fbcon_putcs
-> ops->putcs
Since ops->putcs is a NULL pointer, this leads to a kernel panic.
To prevent this, we need to call set_blitting_type() within set_con2fb_map()
to properly initialize ops->putcs.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: br_netfilter: fix panic with metadata_dst skb
Fix a kernel panic in the br_netfilter module when sending untagged
traffic via a VxLAN device.
This happens during the check for fragmentation in br_nf_dev_queue_xmit.
It is dependent on:
1) the br_netfilter module being loaded;
2) net.bridge.bridge-nf-call-iptables set to 1;
3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port;
4) untagged frames with size higher than the VxLAN MTU forwarded/flooded
When forwarding the untagged packet to the VxLAN bridge port, before
the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and
changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type
of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL.
Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check
for frames that needs to be fragmented: frames with higher MTU than the
VxLAN device end up calling br_nf_ip_fragment, which in turns call
ip_skb_dst_mtu.
The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst
with valid dst->dev, thus the crash.
This case was never supported in the first place, so drop the packet
instead.
PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data.
[ 176.291791] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000110
[ 176.292101] Mem abort info:
[ 176.292184] ESR = 0x0000000096000004
[ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits
[ 176.292530] SET = 0, FnV = 0
[ 176.292709] EA = 0, S1PTW = 0
[ 176.292862] FSC = 0x04: level 0 translation fault
[ 176.293013] Data abort info:
[ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000
[ 176.294166] [0000000000000110] pgd=0000000000000000,
p4d=0000000000000000
[ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth
br_netfilter bridge stp llc ipv6 crct10dif_ce
[ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted
6.8.0-rc3-g5b3fbd61b9d1 #2
[ 176.296314] Hardware name: linux,dummy-virt (DT)
[ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter]
[ 176.297636] sp : ffff800080003630
[ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27:
ffff6828c49ad9f8
[ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24:
00000000000003e8
[ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21:
ffff6828c3b16d28
[ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18:
0000000000000014
[ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15:
0000000095744632
[ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12:
ffffb7e137926a70
[ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 :
0000000000000000
[ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 :
f20e0100bebafeca
[ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 :
0000000000000000
[ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 :
ffff6828c7f918f0
[ 176.300889] Call trace:
[ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter]
[ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter]
[ 176.301703] nf_hook_slow+0x48/0x124
[ 176.302060] br_forward_finish+0xc8/0xe8 [bridge]
[ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter]
[ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter]
[ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter]
[ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter]
[ 176.303359] nf_hook_slow+0x48/0x124
[ 176.303
---truncated---
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
This change passes the selftests in iptables.git.
In the Linux kernel, the following vulnerability has been resolved:
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
In the Linux kernel, the following vulnerability has been resolved:
slip: make slhc_remember() more robust against malicious packets
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455
ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline]
ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212
ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.
In the Linux kernel, the following vulnerability has been resolved:
net: Fix an unsafe loop on the list
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
In the Linux kernel, the following vulnerability has been resolved:
device-dax: correct pgoff align in dax_set_mapping()
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
In the Linux kernel, the following vulnerability has been resolved:
kthread: unpark only parked kthread
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
In the Linux kernel, the following vulnerability has been resolved:
ext4: dax: fix overflowing extents beyond inode size when partially writing
The dax_iomap_rw() does two things in each iteration: map written blocks
and copy user data to blocks. If the process is killed by user(See signal
handling in dax_iomap_iter()), the copied data will be returned and added
on inode size, which means that the length of written extents may exceed
the inode size, then fsck will fail. An example is given as:
dd if=/dev/urandom of=file bs=4M count=1
dax_iomap_rw
iomap_iter // round 1
ext4_iomap_begin
ext4_iomap_alloc // allocate 0~2M extents(written flag)
dax_iomap_iter // copy 2M data
iomap_iter // round 2
iomap_iter_advance
iter->pos += iter->processed // iter->pos = 2M
ext4_iomap_begin
ext4_iomap_alloc // allocate 2~4M extents(written flag)
dax_iomap_iter
fatal_signal_pending
done = iter->pos - iocb->ki_pos // done = 2M
ext4_handle_inode_extension
ext4_update_inode_size // inode size = 2M
fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix?
Fix the problem by truncating extents if the written length is smaller
than expected.
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix access to uninitialised lock in fc replay path
The following kernel trace can be triggered with fstest generic/629 when
executed against a filesystem with fast-commit feature enabled:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x66/0x90
register_lock_class+0x759/0x7d0
__lock_acquire+0x85/0x2630
? __find_get_block+0xb4/0x380
lock_acquire+0xd1/0x2d0
? __ext4_journal_get_write_access+0xd5/0x160
_raw_spin_lock+0x33/0x40
? __ext4_journal_get_write_access+0xd5/0x160
__ext4_journal_get_write_access+0xd5/0x160
ext4_reserve_inode_write+0x61/0xb0
__ext4_mark_inode_dirty+0x79/0x270
? ext4_ext_replay_set_iblocks+0x2f8/0x450
ext4_ext_replay_set_iblocks+0x330/0x450
ext4_fc_replay+0x14c8/0x1540
? jread+0x88/0x2e0
? rcu_is_watching+0x11/0x40
do_one_pass+0x447/0xd00
jbd2_journal_recover+0x139/0x1b0
jbd2_journal_load+0x96/0x390
ext4_load_and_init_journal+0x253/0xd40
ext4_fill_super+0x2cc6/0x3180
...
In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in
function ext4_check_bdev_write_error(). Unfortunately, at this point this
spinlock has not been initialized yet. Moving it's initialization to an
earlier point in __ext4_fill_super() fixes this splat.
In the Linux kernel, the following vulnerability has been resolved:
exfat: fix memory leak in exfat_load_bitmap()
If the first directory entry in the root directory is not a bitmap
directory entry, 'bh' will not be released and reassigned, which
will cause a memory leak.
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
In the Linux kernel, the following vulnerability has been resolved:
exec: don't WARN for racy path_noexec check
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
[brauner: keep redundant path_noexec() check]
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]
In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix i_data_sem unlock order in ext4_ind_migrate()
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Rule: add
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix system hang while resume with TBT monitor
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
(cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85)
In the Linux kernel, the following vulnerability has been resolved:
static_call: Handle module init failure correctly in static_call_del_module()
Module insertion invokes static_call_add_module() to initialize the static
calls in a module. static_call_add_module() invokes __static_call_init(),
which allocates a struct static_call_mod to either encapsulate the built-in
static call sites of the associated key into it so further modules can be
added or to append the module to the module chain.
If that allocation fails the function returns with an error code and the
module core invokes static_call_del_module() to clean up eventually added
static_call_mod entries.
This works correctly, when all keys used by the module were converted over
to a module chain before the failure. If not then static_call_del_module()
causes a #GP as it blindly assumes that key::mods points to a valid struct
static_call_mod.
The problem is that key::mods is not a individual struct member of struct
static_call_key, it's part of a union to save space:
union {
/* bit 0: 0 = mods, 1 = sites */
unsigned long type;
struct static_call_mod *mods;
struct static_call_site *sites;
};
key::sites is a pointer to the list of built-in usage sites of the static
call. The type of the pointer is differentiated by bit 0. A mods pointer
has the bit clear, the sites pointer has the bit set.
As static_call_del_module() blidly assumes that the pointer is a valid
static_call_mod type, it fails to check for this failure case and
dereferences the pointer to the list of built-in call sites, which is
obviously bogus.
Cure it by checking whether the key has a sites or a mods pointer.
If it's a sites pointer then the key is not to be touched. As the sites are
walked in the same order as in __static_call_init() the site walk can be
terminated because all subsequent sites have not been touched by the init
code due to the error exit.
If it was converted before the allocation fail, then the inner loop which
searches for a module match will find nothing.
A fail in the second allocation in __static_call_init() is harmless and
does not require special treatment. The first allocation succeeded and
converted the key to a module chain. That first entry has mod::mod == NULL
and mod::next == NULL, so the inner loop of static_call_del_module() will
neither find a module match nor a module chain. The next site in the walk
was either already converted, but can't match the module, or it will exit
the outer loop because it has a static_call_site pointer and not a
static_call_mod pointer.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc()
In mlx5e_tir_builder_alloc() kvzalloc() may return NULL
which is dereferenced on the next line in a reference
to the modify field.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up).
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: lantiq_etop: fix memory disclosure
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied.
In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix buffer overflow when parsing NFS reparse points
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
In the Linux kernel, the following vulnerability has been resolved:
block: fix integer overflow in BLKSECDISCARD
I independently rediscovered
commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
block: fix overflow in blk_ioctl_discard()
but for secure erase.
Same problem:
uint64_t r[2] = {512, 18446744073709551104ULL};
ioctl(fd, BLKSECDISCARD, r);
will enter near infinite loop inside blkdev_issue_secure_erase():
a.out: attempt to access beyond end of device
loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
bio_check_eod: 3286214 callbacks suppressed
In the Linux kernel, the following vulnerability has been resolved:
drm/stm: Avoid use-after-free issues with crtc and plane
ltdc_load() calls functions drm_crtc_init_with_planes(),
drm_universal_plane_init() and drm_encoder_init(). These functions
should not be called with parameters allocated with devm_kzalloc()
to avoid use-after-free issues [1].
Use allocations managed by the DRM framework.
Found by Linux Verification Center (linuxtesting.org).
[1]
https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
In the Linux kernel, the following vulnerability has been resolved:
ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free
When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(),
the 'ppath' is updated but it is the 'path' that is freed, thus potentially
triggering a double-free in the following process:
ext4_ext_replay_update_ex
ppath = path
ext4_force_split_extent_at(&ppath)
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path) ---> path First freed
*orig_path = path = NULL ---> null ppath
kfree(path) ---> path double-free !!!
So drop the unnecessary ppath and use path directly to avoid this problem.
And use ext4_find_extent() directly to update path, avoiding unnecessary
memory allocation and freeing. Also, propagate the error returned by
ext4_find_extent() instead of using strange error codes.
In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in more places
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
In the Linux kernel, the following vulnerability has been resolved:
media: venus: fix use after free bug in venus_remove due to race condition
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove.
In the Linux kernel, the following vulnerability has been resolved:
gso: fix udp gso fraglist segmentation after pull from frag_list
Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Fix zero-division error when disabling tc cbs
The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error.
In the Linux kernel, the following vulnerability has been resolved:
uprobes: fix kernel info leak via "[uprobes]" vma
xol_add_vma() maps the uninitialized page allocated by __create_xol_area()
into userspace. On some architectures (x86) this memory is readable even
without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ,
although this doesn't really matter, debugger can read this memory anyway.