Known Exploited Vulnerabilities

Adminer is an open-source database management in a single PHP file. In adminer from version 4.0.0 and before 4.7.9 there is a server-side request forgery vulnerability. Users of Adminer versions bundling all drivers (e.g. `adminer.php`) are affected. This is fixed in version 4.7.9.

Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.

A deserialization vulnerability in the License Servlet of Fortra's GoAnywhere MFT allows an actor with a validly forged license response signature to deserialize an arbitrary actor-controlled object, possibly leading to command injection.

Libraesva ESG 4.5 through 5.5.x before 5.5.7 allows command injection via a compressed e-mail attachment. For ESG 5.0 a fix has been released in 5.0.31. For ESG 5.1 a fix has been released in 5.1.20. For ESG 5.2 a fix has been released in 5.2.31. For ESG 5.4 a fix has been released in 5.4.8. For ESG 5.5. a fix has been released in 5.5.7.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

Update: On November 5, 2025, Cisco became aware of a new attack variant against devices running Cisco Secure ASA Software or Cisco Secure FTD Software releases that are affected by CVE-2025-20333 and CVE-2025-20362. This attack can cause unpatched devices to unexpectedly reload, leading to denial of service (DoS) conditions. Cisco strongly recommends that all customers upgrade to the fixed software releases that are listed in the Fixed Software ["#fs"] section of this advisory. A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to access restricted URL endpoints that are related to remote access VPN that should otherwise be inaccessible without authentication. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on a device. A successful exploit could allow the attacker to access a restricted URL without authentication.

Type confusion in V8 in Google Chrome prior to 140.0.7339.185 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

A deserialization of untrusted data vulnerability affecting DELMIA Apriso from Release 2020 through Release 2025 could lead to a remote code execution.

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won't be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because exit_task_work() is called before exit_notify(). But the check still makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail anyway in this case.

Deserialization of Untrusted Data vulnerability in Sitecore Experience Manager (XM), Sitecore Experience Platform (XP) allows Code Injection.This issue affects Experience Manager (XM): through 9.0; Experience Platform (XP): through 9.0.

In multiple locations, there is a possible way to escape chrome sandbox to attack android system_server due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

TP-Link TL-WR841N dropbearpwd Improper Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from improper authentication. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. . Was ZDI-CAN-19899.

The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).

TP-Link TL-WA855RE V5 20200415-rel37464 devices allow an unauthenticated attacker (on the same network) to submit a TDDP_RESET POST request for a factory reset and reboot. The attacker can then obtain incorrect access control by setting a new administrative password.

Incomplete authorization of linked device synchronization messages in WhatsApp for iOS prior to v2.25.21.73, WhatsApp Business for iOS v2.25.21.78, and WhatsApp for Mac v2.25.21.78 could have allowed an unrelated user to trigger processing of content from an arbitrary URL on a target’s device. We assess that this vulnerability, in combination with an OS-level vulnerability on Apple platforms (CVE-2025-43300), may have been exploited in a sophisticated attack against specific targeted users.

FreePBX is an open-source web-based graphical user interface. FreePBX 15, 16, and 17 endpoints are vulnerable due to insufficiently sanitized user-supplied data allowing unauthenticated access to FreePBX Administrator leading to arbitrary database manipulation and remote code execution. This issue has been patched in endpoint versions 15.0.66, 16.0.89, and 17.0.3.

Memory overflow vulnerability leading to Remote Code Execution and/or Denial of Service in NetScaler ADC and NetScaler Gateway when NetScaler is configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with IPv6 services or servicegroups bound with IPv6 servers (OR) NetScaler ADC and NetScaler Gateway 13.1, 14.1, 13.1-FIPS and NDcPP: LB virtual servers of type (HTTP, SSL or HTTP_QUIC) bound with DBS IPv6 services or servicegroups bound with IPv6 DBS servers (OR) CR virtual server with type HDX

Privilege escalation to NetworkService Account access in Citrix Session Recording when an attacker is an authenticated user in the same Windows Active Directory domain as the session recording server domain

Limited remote code execution with privilege of a NetworkService Account access in Citrix Session Recording if the attacker is an authenticated user on the same intranet as the session recording server

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When reading a config value, Git strips any trailing carriage return and line feed (CRLF). When writing a config entry, values with a trailing CR are not quoted, causing the CR to be lost when the config is later read. When initializing a submodule, if the submodule path contains a trailing CR, the altered path is read resulting in the submodule being checked out to an incorrect location. If a symlink exists that points the altered path to the submodule hooks directory, and the submodule contains an executable post-checkout hook, the script may be unintentionally executed after checkout. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS 15.8.5, iOS 16.7.12 and iPadOS 16.7.12. Processing a malicious image file may result in memory corruption. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

Deserialization of Untrusted Data vulnerability in N-able N-central allows Local Execution of Code.This issue affects N-central: before 2025.3.1.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

Unspecified vulnerability in Microsoft Excel 2000, XP, 2003, and 2004 for Mac, and possibly other Office products, allows remote user-assisted attackers to execute arbitrary code via unknown attack vectors, as demonstrated by Exploit-MSExcel.h in targeted zero-day attacks.

Use-after-free vulnerability in the SetMouseCapture implementation in mshtml.dll in Microsoft Internet Explorer 6 through 11 allows remote attackers to execute arbitrary code via crafted JavaScript strings, as demonstrated by use of an ms-help: URL that triggers loading of hxds.dll.

A path traversal vulnerability affecting the Windows version of WinRAR allows the attackers to execute arbitrary code by crafting malicious archive files. This vulnerability was exploited in the wild and was discovered by Anton Cherepanov, Peter Košinár, and Peter Strýček from ESET.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. The unauthenticated /config/getuser endpoint allows for remote administrator password disclosure.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

Data Integrity Failure in 'Backup Config' in D-Link DNR-322L <= 2.60B15 allows an authenticated attacker to execute OS level commands on the device.

A Cross-Site Request Forgery (CSRF) vulnerability has been identified in PaperCut NG/MF, which, under specific conditions, could potentially enable an attacker to alter security settings or execute arbitrary code. This could be exploited if the target is an admin with a current login session. Exploiting this would typically involve the possibility of deceiving an admin into clicking a specially crafted malicious link, potentially leading to unauthorized changes.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

SysAid On-Prem versions <= 23.3.40 are vulnerable to an unauthenticated XML External Entity (XXE) vulnerability in the Checkin processing functionality, allowing for administrator account takeover and file read primitives.

SysAid On-Prem versions <= 23.3.40 are vulnerable to an unauthenticated XML External Entity (XXE) vulnerability in the Server URL processing functionality, allowing for administrator account takeover and file read primitives.

Improper control of generation of code ('code injection') in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Insufficient validation of untrusted input in ANGLE and GPU in Google Chrome prior to 138.0.7204.157 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

CrushFTP 10 before 10.8.5 and 11 before 11.3.4_23, when the DMZ proxy feature is not used, mishandles AS2 validation and consequently allows remote attackers to obtain admin access via HTTPS, as exploited in the wild in July 2025.

Deserialization of untrusted data in on-premises Microsoft SharePoint Server allows an unauthorized attacker to execute code over a network. Microsoft is aware that an exploit for CVE-2025-53770 exists in the wild. Microsoft is preparing and fully testing a comprehensive update to address this vulnerability. In the meantime, please make sure that the mitigation provided in this CVE documentation is in place so that you are protected from exploitation.

An improper neutralization of special elements used in an SQL command ('SQL Injection') vulnerability [CWE-89] in Fortinet FortiWeb version 7.6.0 through 7.6.3, 7.4.0 through 7.4.7, 7.2.0 through 7.2.10 and below 7.0.10 allows an unauthenticated attacker to execute unauthorized SQL code or commands via crafted HTTP or HTTPs requests.

In Wing FTP Server before 7.4.4. the user and admin web interfaces mishandle '\0' bytes, ultimately allowing injection of arbitrary Lua code into user session files. This can be used to execute arbitrary system commands with the privileges of the FTP service (root or SYSTEM by default). This is thus a remote code execution vulnerability that guarantees a total server compromise. This is also exploitable via anonymous FTP accounts.

Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

The mailSend function in the isMail transport in PHPMailer before 5.2.18 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted Sender property.

fastping.c in MRLG (aka Multi-Router Looking Glass) before 5.5.0 allows remote attackers to cause an arbitrary memory write and memory corruption.

There is a File Content Disclosure vulnerability in Action View <5.2.2.1, <5.1.6.2, <5.0.7.2, <4.2.11.1 and v3 where specially crafted accept headers can cause contents of arbitrary files on the target system's filesystem to be exposed.

Zimbra Collaboration Suite before 8.6 patch 13, 8.7.x before 8.7.11 patch 10, and 8.8.x before 8.8.10 patch 7 or 8.8.x before 8.8.11 patch 3 allows SSRF via the ProxyServlet component.

Type confusion in V8 in Google Chrome prior to 138.0.7204.96 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High)

The TeleMessage service through 2025-05-05 configures Spring Boot Actuator with an exposed heap dump endpoint at a /heapdump URI, as exploited in the wild in May 2025.